Question about 2002 Oldsmobile Bravada

1 Answer

Rear Windscreen wiper not working Seat Ibiza 2003

Wiper stopped working (due to ice). Im going to try changing the fuse, but hope I haven't damaged the motor? Does anyone know the fuse number I will need? Thanks.

Posted by on

  • Anonymous Mar 18, 2014

    no fuse box diagram skoda classic 2008

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 1,000 Answers

Smonahan, The rear wiper fuse is actually a circuit breaker. It will reset itself.
Your wiper arm has probably stripped were it attaches to the motor shaft. You can check by trying to move the wiper arm with your hand, if it moves back and forth, its stripped. A new wiper arm will be needed.
Try it and let me know.
Regards,

Posted on Feb 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear wiper doesn't work


check rear wiper fuse and relay.if wiper motor getting power but do not work.rear wiper motor bad.if fuse and relay okay but no power going to rear wiper rear wiper switch could be bad.

May 14, 2013 | 2000 Seat Ibiza

1 Answer

I have an audi a4 convertible and the wipers are moving very slowly and is dangerous please help me find out what the problem is?


How to repair wipers mechanism & change a wiper motor on 2003 Audi A4

First time you must diagnose why windscreen wipers going slow and/or stopping.
In order to find out the cause of wipers stopping you can try follows:

1. Carefully extract the wiper arms from their axles (two pieces). In some cases you need to use an extracting tool. Heed of the windscreen !!!
2. Disassemble the plastic covers from the bottom of the windscreen.
3. With the bonnet up you can start the engine, (transmission in "N" or "P" position and parking brake on). Now you must switch on the control lever of the wipers, and go to the engine compartment. If the wiper motor runs let the wiper motor running for a few minutes and switch off. Go to the step 4. If the wiper motor do not runs you must check first the electrical feeding of the motor. It is necessary to unscrew three bolts of the mechanism and disconnect the electrical coupling (difficult assurance). If the electrical feeding is OK you must replace the motor - steps 5, 6, 7. If not you must check electrical connections, the control switch of wipers and electric cables.
4. Now you must check the two bearings of wiper mechanism with your hand. In the most cases the left bearing is out of order (is very hot). This is the most encounter fault of the wipers running at Audi.
5. For have enough space to manipulation the wiper motor together with their mechanism you must extract the plastic cover of the engine computer box, and extract also the box screws. Then you can move slowly the engine computer box, just for a few milimeters.
6. You must disconnect the electrical coupling of the motor (difficult assurance), unscrew three bolts of the mechanism and extract together with the motor. You must move them slowly between windscreen and engine computer box until the wiper motor go out together with the mechanism. This is the most difficult operation!
7. Now you can repair the bearings, replace entire wiper mechanism or replace the wiper motor. It is not very simply, but it works.
Heed of the windscreen !!!
Refit all in reverse order.

Please do rate my response. Thanks!

Jan 25, 2011 | 2003 Audi A4 Cabriolet

1 Answer

My front wipers arent working, could it just be the fuse? if so which fuse do i change as the list only has my rear wiper on it.


Fuse nr.31, F31, (25A) = Windscreen wipers
This fuse is placed on fuse box / relay plate engine bay 1, under bonnet in engine compartment area!

If the fuse F31 is OK.
You must diagnose why windscreen wipers going slow and/or stopping.
In order to find out the cause of wipers stopping you can try follows:
1. Carefully extract the wiper arms from their axles (two pieces). In some cases you need to use an extracting tool. Heed of the windscreen !!!
2. Disassemble the plastic covers from the bottom of the windscreen.
3. With the bonnet up you can start the engine, (transmission in "N" or "P" position and parking brake on). Now you must switch on the control lever of the wipers, and go to the engine compartment. If the wiper motor runs let the wiper motor running for a few minutes and switch off. Go to the step 4. If the wiper motor do not runs you must check first the electrical feeding of the motor. It is necessary to unscrew three bolts of the mechanism and disconnect the electrical coupling (difficult assurance). If the electrical feeding is OK you must replace the motor - steps 5, 6, 7. If not you must check electrical connections, the control switch of wipers and electric cables.
4. Now you must check the two bearings of wiper mechanism with your hand. In the most cases the left bearing is out of order (is very hot). This is the most encounter fault of the wipers running at Audi.
5. For have enough space to manipulation the wiper motor together with their mechanism you must extract the plastic cover of the engine computer box, and extract also the box screws. Then you can move slowly the engine computer box, just for a few milimeters.
6. You must disconnect the electrical coupling of the motor (difficult assurance), unscrew three bolts of the mechanism and extract together with the motor. You must move them slowly between windscreen and engine computer box until the wiper motor go out together with the mechanism. This is the most difficult operation!
7. Now you can repair the bearings, replace entire wiper mechanism or replace the wiper motor. It is not very simply, but it works.
Heed of the windscreen !!!
Refit all in reverse order.

Jan 13, 2010 | 2006 Audi A3

4 Answers

VW Fox. My front windscreen wipers wont work. I cannot see that they are frozen as the washer works ok. I have checked the manual and it say the fuses for wipers is located at no 29, the only problem is...


My wife has a 08 Fox and her front wipers stopped working it's just a fuse in bank 7 a 10 amp just replace with a new one or swap for the 10 amp fuse in bank 11 (just a warning lamp for the handbrake) until you get a new one. ;-)

Jan 05, 2010 | 2001 Mini Cooper

2 Answers

I need to know where i can find my chassis number on my golf gti mk4


try looking on the top of the bulkhead just below the windscreen with the bonnet up near the wiper arms.

Oct 29, 2009 | 2001 Volkswagen Golf

1 Answer

Hi, the rear windscreen wiper on my 2003 VW POLO has just stopped working. Can you help? Cheers Emma. (For some reason it wouldn't let me select polo from the pick list for VW cars.)


The most common reason for this is a blown fuse, so using your vehicle owners book locate and check the fuse first. (if you don't have one then buy a Haynes manual for your car, the cost will pay for itself with the first repair you do). Modern automotive fuses not only have the current rating clearly marked numerically, but are colour coded and the fuses are designed so that you can easily see if they're blown when you pull them out to check. Most modern vehicle fuseboxes have a few spare fuses included and often have a small plastic tool to assist with pulling them out.

Normally a blown fuse needs further investigation as they should only fail if there's been a problem which would otherwise cause fire or other damage, but if wipers are operated inappropriately then it can cause enough load to blow the fuse. Sometimes the wiper spindles can become worn allowing water to get in and corrode the internal parts; this will cause the spindles to bind or even seize up and also cause the wiper motor to draw sufficient current to blow the fuse.

Inappropriate use includes operating the wipers when the screen is dry, trying to use them to clear snow, ice or debris, operating them if the blades or arms are damaged.

If your problem turns out to be more than a straightforward blown fuse then please add a comment to my answer and I'll try to give you more specific advice. If my answer has solved your problem then please return the favour by rating my answer.

Sep 24, 2009 | 2003 Volkswagen Golf

1 Answer

Rear wipers not working


hi there have you checked if your getting a live feed going upto the motor when rear wiper is on cause puntos are prone for rear wiper motors?hope this useful to you.

Sep 02, 2009 | Fiat 124 Cars & Trucks

2 Answers

Hyundai Accent SI-back windscreen wiper


there is a 15 amp fuse for the rear wiper under the bonnet check this, also i think the accent has a seperste switch in the dashboard for the rear wiper like th hyundai coupe.


Mar 24, 2009 | 2000 Hyundai Accent

2 Answers

Rear wiper does not work at all. front wipers work fine. rear washer works


1. check the fuse to the rear wiper motor
2. check for power to rear wiper motor at the motor (power wire going in to the wiper motor with rear wiper switch on)
If you have good fuses & have power going in to the rear wiper motor...
3. Pull old rear wiper motor and install a new rear wiper motor.
Thank you please drive thru......

Feb 26, 2009 | 2001 Ford Expedition

Not finding what you are looking for?
2002 Oldsmobile Bravada Logo

1,132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...