Question about 1998 Dodge Intrepid

1 Answer

1998 Dodge Intrepid Stalling while driving ,running rough at 45mp

6 cyc 24 valve has been stalling while driving and will only start if left to sit for a few minutes..it also runs rough at 45 mph stepping on the gas and going faster or braking and going slower smooths back out...Ive kept u on regular oil changes and routine maintainence..plugs wires and such...sick of the guessing games any suggestions?

Posted by on

  • mike ryner
    mike ryner May 11, 2010

    Is it a 2.7, 3.2, or a 3.5 liter engine? And is your check engine list on?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 95 Answers

Have you check your battery cables, the condition, if there tight? these cars have a tendancy to have the cables rot out and that will cause your troubles.

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 dodge intrepid stalls out while driving and sitting in red light why


Dodge 2000 Intrepid stalling on Traffic Light - This is caused by either wrong amount of Fuel or Air mixing in Idle condition. Please check fuel pressure at Idle which should be at least 38 psi and should go up when you press the accelerator. If fuel pressure is okay then Clean out the Throttle body carefully. This should solve the problem if no Check engine light is on. If Check engine light is on then please confirm and give me the codes present in On Board Diagnostic port (Auto Zone or Advance Auto will read the codes free for you) and we will go from there.

Jan 05, 2015 | 2000 Dodge Intrepid

1 Answer

Stalling problem


first check points....fuel, combustion, spark...it runs so it has compression and spark, leads me to believe you fuel pump or filter.

Mar 28, 2014 | 1998 Dodge Intrepid

3 Answers

Stalling at low idle


I don't know this specific car. But, if it has one, check your Idle Air Valve. This can cause the engine to stall. If you can hold the gas pedal and the engine will continue to run until you let off the gas, it is likely the IAV. It will not necessarily cause the engine to run rough. That could be a number of things like spark plugs, wires or dirty injectors. It could also be a compression problem. Is the check engine light on?

Mar 04, 2014 | 1995 Dodge Intrepid

1 Answer

2001 dodge intrepid r/t 3.5


possible the EGR valve check for any codes or check engine light on

May 28, 2013 | Dodge Intrepid Cars & Trucks

1 Answer

My 1998 Dodge Intrepid is starting & then stalling only after a few seconds. The engine light came on, & the code was P1391. Any ideas?


That code is indicating an intermittant crank shaft or cam shaft sensor fault. Because the engine is starting then stalling, check to see if you have spark after the stall. If spark is still present, you are probobley looking at a cam sensor circuit issue. The cam sensor controls the fuel injector pulse. If the cam sensor fails on a chrysler product, the fuel injectors will not function.

Nov 25, 2011 | 1998 Dodge Intrepid

2 Answers

1998 Dodge Intrepid 2.7 -- After running for 30 minutes, the car starts and runs rough. Driving up to temperature it runs fine. After sitting for 15 minutes or so, when starting it runs rough and will...


it sure sounds like you have an EGR problem. This valve controls the flow of unburned exhaust gases and re-routes them too the intake to be re-burned. This valve is usually open at highway or cruise speeds. Not usually open at idle. If this EGR valve is open at idle, you get a rough running for sure just like a mis fire and will smooth out as your speed increases. I would get that checked out and if faulty, replace. Please keep in mind that this part is quite expensive new, but it is electrically controlled. good luck!

Aug 25, 2010 | 1998 Dodge Intrepid

1 Answer

2000 dodge intrepid 3.2 will crank at times but not start


had my grandmas car doing a similiar concern ended up being cranck sensor was 40 bucks took about 15 minutes not hard at all

May 28, 2009 | 2000 Dodge Intrepid

1 Answer

1998 Intrepid random misfire


I have a 98 dodge intrepid with a 2.7. My car would run fine at times and then all of a sudden start to miss badly and the valves would rattle. The mechanic changed the cam shaft sensor and now it runs very well.

Feb 28, 2009 | 1998 Dodge Intrepid

2 Answers

My 1998 Olds 88 has been stalling and running rough.


Check and clean the IAC valve. Idle Control Valve. Use brake cleaner or carburater cleaner . Remove the duct work from the air filter assembly. It is located just inside . Run the engine at 1200 rpms and spray the valve. The valve can also be removed and cleaned.

Jan 07, 2009 | 1998 Oldsmobile 88

Not finding what you are looking for?
1998 Dodge Intrepid Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...