An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.
Re: how to reset service light indicator
YOU HAVE 3 BUTTONS ON THE DASH (RIGHT HAND SIDE) YOU WILL HAVE ONE WITH A SPANNER (BUTTON A) AND ONE THAT HAS TWO 00 (BUTTON B).....HOLD A,SWITCH IGNITION ON,RELEASE A.PRESS B UNTIL DISPLAY CLEARS..MAY TAKE A FEW GOES BUT YOU WILL GET IT...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Press and hold button [A] in the picture below.
2. Switch ignition ON. 3. The letters "OIL" will appear in the trip recorder display. 4. Release button [A]. 5. Press and release button [A]. 6. The letters "INSP" will appear in the trip recorder display. 7. Pull out button [B] for approximately 2 seconds to reset the display.
In 2006 BMW developed what they Condition Based Service (CBS), this means even when you change the oil and filter, the only way to reset the service indicator is to take it to the dealer, to be hooked up to thier computer. I have the same problem, I am waiting for some aftermaket code breaker to be developed to fix this problem. Hope this helps, let me know.
Yes the HOLD light comes on when the computer detects a malfunction with the transmission....one quick flash of the hold light means a 01 code. six quick flashes would mean a 06 code. 5 long flashes would indicate a 50...6 long flashes would indicate a 60 code. Hope this helps.
Fixed service intervals Press and hold button [A] 24297. Switch ignition ON. Release button [A]. The words "SERVICE" or "SERVICE IN xxxx MI" will appear in the trip recorder display. Press button [B] until the display clears and is replaced with the new service interval or "SERVICE!". Switch ignition OFF.
button A middle right of check
button B right of button A
Note: the Service Reminder Indicator displays 3 messages: OEL, IN 01, and IN 02. These display to alert the driver to follow the items listed under the manufacturer's service interval.To reset the message displays, turn the ignition switch on. Press and hold the odometer reset button "A" located below the speedometer. Turn off the ignition while holding the button. "OEL" will display on the indicator. Press and hold the lower digital clock reset button "B" until five dashes appear in the display. If needed, press the odometer reset button until "IN 01" appears and then press the clock reset button until five dashes appear. If needed, press the odometer reset button until "IN 02" is displayed and then press the clock reset button until five dashes appear.To exit reset mode, turn the ignition switch on and when "IN 01" appears, turn the ignition switch off