Question about 2004 Dodge Stratus

1 Answer

Abs and traction light are on

My abs and traction control light are on. I've have new brakes, new rotors and new tie rods put on however, nobody can tell me why the light wont go off. Any ideas?

Posted by on

  • Anonymous Mar 13, 2014

    front brakes grind when applied and abs light and traction light and brake light is on but goes off when restarted

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

You can try to reset the computer with a diagnostic machine but, it seems like the brakes were installed without resetting the abs sensors. if this sensor is not re connected, this will cause your light to come on.

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes traction control to keep sticking and brakes go low when brakes are hit hard and the car makes a noise and shaking like tire rods are broke?


also tied into ABS brakes...depending on mileage...could just be worn out pads, and warped rotors...inspect closely...

Aug 13, 2015 | 2008 Buick Lacrosse

1 Answer

Resetting abs warning light


Changing brake pads and rotors will not solve this problem. Go to Auto Zone and have them read your computer for ABS codes and then you can zero in on the problem.

Aug 17, 2014 | 2010 Chevrolet Impala

2 Answers

Chevy equinox 2006 Brakes Grinding, Pulsating, and Resisting


You did not mention rotors but that could be the source of the grinding. The pulsating probably is traceable to your ABS and traction control syatems

Apr 10, 2013 | 2006 Chevrolet Equinox

1 Answer

Saturn vue 2004 intermittent abs and traction control comes on and after restarting shuts off?


Has this happened after you replaced the sensors for the abs. if so they have to be set at a gap close to the rotor sensor to read correctly. The other thing maybe if the new sensors area slightly different to the original ones the abs might be having trouble identifying them.
The last one maybe, could the new brake pads be causing flexing or pushing against something resulting in this intermittent problem.

Jun 13, 2012 | 2004 Saturn VUE

1 Answer

1999 Oldsmobile silhouette brake light and tcs


check the abs sensors common to hit or damage the wiring or knock connection loose when doing a brake job the traction control system[tcs] is tied into the abs system

Jun 28, 2010 | 1999 Oldsmobile Silhouette

3 Answers

Traction control and anti-locks(ABS) lights come on.


Traction control and anti-locks(ABS) lights come on there is sensors that are pluged in behind the rotors check and see if they are disconected or loose sometimes when you change your brake pads they might come loose and not making contact.

Jul 06, 2010 | 1998 Cadillac DeVille

1 Answer

Brake peddle is chattering 2003 ion and would like to pull the anti lock brake fuse (if safe ) until i can afford the repair. I would like to know witch fuse to pull?ABS is on and traction control


If brake pedal is chattering or pulsating it is most likely because you need either front or rear rotors, or both. They are rusted or out of round. If there is something wrong with either your abs or traction control,the abs or traction control light will come on & stay on. As soon as these lights come on, it automatically disables abs or traction control. If you would like to take out fuse that disables abs or traction control circuits, it will leave the lights on.You just wont have their functions. If by some strange condition your chattering goes away, then there is indeed something wrong with your abs or traction control.Fuses are labeled abs or traction either under hood or in your fuse panel in car.

Jun 13, 2010 | 2003 Saturn ION

2 Answers

Traction control light and abs light


ok your problem is that your brakes are under force you shold get new brake pads ok

Jul 14, 2008 | 2002 Audi A4

Not finding what you are looking for?
2004 Dodge Stratus Logo

724 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...