Question about 1984 Chevrolet S-10

1 Answer

Head lights in my 84 s10

My high beams work but my low dont what could this be?

Posted by on

  • 1 more comment 
  • brad
    brad Feb 12, 2009

    so what do I have to replace?

  • brad
    brad Feb 12, 2009

    I dont have a tilt colum.But what do you mean ( I would pull out one of the headlights and check in on your battery to see if it is burned out)?

  • yadayada
    yadayada May 11, 2010

    dimmer switch is defective, this is part of the turn signal switch. This assumes the bulbs are good.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Either both of your low beam headlights are burned out or you might have a bad dimmer switch. I would pull out one of the headlights and check in on your battery to see if it is burned out (you could also check for continuity of the filaments with a multi-meter if you have one). sometimes trucks with tilt columns have broken wires in the column where it flexes as you tilt the wheel (usually high mileage vehicles or ones with loose columns). good luck

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 S10 high beams work, but low beams don't.


Do you have power in and out of the dimmer switch in the low beam position ?

Feb 15, 2014 | 1999 Chevrolet S-10 Pickup

1 Answer

The headlights on my 84 chevy pickup are not working properly. When lights are on, and set for low beam, my driver side low beam does not come on - the passenger side does. When I set the high beams,...


You have lost the ground, evidently on the left side. The lamps act that way because one of the lamps is grounding through the elements of the other lamp.

Oct 16, 2013 | Cars & Trucks

1 Answer

High beams dont work


Could be that your high beam light's are burnt out and need to be replaced. When you say the the switch is new you mean the lever on the stearing collum is new right?? Good luck

Apr 06, 2009 | 1998 Pontiac Sunfire

1 Answer

My headlights are not working, but shows my high beams are on


Low Beam Fuse may be bad.
Low Beam relay position is bad.
Stalk that controls the high/low beams/cruise/lights is bad.
Low beam filament may be bad in both headlamps.

Mar 06, 2009 | 1999 Chevrolet S-10 Pickup

1 Answer

1984 S10 head lights


1.- check up the conecctor to the light beam
2.- be sure than you have a good ground connection
3.- check the light beam filamets ,it can be broken
4.- I'm pretty sure than your problem is in the conector because the come loose and you loose a good contact

Jan 27, 2009 | 1984 Chevrolet S-10

1 Answer

1984 S10 head lights


The switch could be out. Under the dash their will be a pannel that covers the stering wheel shaft remove this. On the top of the shaft their will be two bars that go down to a box, one is for the ignition the other is the high beams. Replace the box that the light switch goes to. This should fix ya.

Please contact me if your problem presist.

Thanks, Charlie

Jan 27, 2009 | 1985 Chevrolet Chevy

1 Answer

1984 S10 head lights


Sounds like the switch.

Jan 27, 2009 | 1984 Chevrolet S-10

1 Answer

Turn head lights on every light works except low beams


thare is a high beam relay and a low beam relay in the fuse box find the low beam relay and replace it. if this dont work its probabley the switch

Dec 31, 2008 | 2003 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...