Engine can engine from 98 intrigue be used in an 01 intrigue?

Engine shuts off randomly while driving, also random no or weak ...

forums.edmunds.com > Oldsmobile > Oldsmobile Intrigue
Sep 18, 2014 - 1 post Learn more about Oldsmobile Intrigue at the Edmunds.com Car Forums! ... If you think back to the times the car just shut off when driving, it was ... Oldsmobile Alero Maintenance and Repair
31 posts
Dec 18, 2013
Oldsmobile Intrigue Starting/Stalling
31 posts
Jul 24, 2007
Oldsmobile Alero Starting-Stalling Problems
31 posts
Jun 21, 2006
More results from forums.edmunds.com

Failed Fuel Pump Can Cause Engine to Stall : Oldsmobile ...

repairpal.com > Problems > Oldsmobile > Intrigue

While driving my 98 oldsmobile intrigue suddenly the engine talled/died, I could not control ... Car just died and won't stay running I can't hear fuel pump kick on!

engines come 3 ways, short block, long block or with all , including manifold., so ? which is it?
USA? we cant guess country , so will wild guess this as USA.
the dealers are gone.
so you cant just go there, online and see the whole engine and all parts there.
the engine exchange people know that, why not ask them
or just look at the many sellers on line of rebuilt engines.
modifications are huge. potentially.

• smog.
• added mounts. (for newer egr parts... yes, smog) or more....!!!
• upgrades.
• moved filters.
• new heads
• new oil pump designs.
• endless list here.?

to find out history why not join a real Isuzu form and ask.
some people keep records there of this topic.

Po137 02 sensor circuir low voltage bank 1
Po171 fuel trim system lean bank 1
p0336 crankshaft oosition sensor A circuit/range oerformance
p1404 IAT-B CIRCUIT Malfunctiin/EGR CLOSED PISITION PERFORMANCE

This is normal. When cold, the engine is in "fast idle" to warm up the engine more quickly. Solution: allow engine to warm up.

sounds like you are going to need a ******. Are there any codes. can you check the ****** fluid level

Well tell them to get it checked and fixed before you will buy it....................... duh!

I'm currently having problems with my ignition and I spoke to the dealer regarding replacing the engine lock cylinder. $215 for the parts and $160 for the labor

Good afternoon! I am enclosing 2 different engine configurations possible on this vehicle. Good luck and i hope this info helps!

NO.

just lift it up in the air lower the engine just a little and depending on the bolts on there you may need to torch the old bolts off and put the new ones on that come with it! hope this helps!