Question about 2001 Chevrolet Lumina
How do I access the brake light in the back window to change the bulbs?
Here ya Go!
Posted on Feb 11, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just had to do this, and it isn't all that easy or quick. First, gently work the gray, carpet like cover loose from the area around the tail light ,(this may give you a little trouble). Once you have done this, you will see three silver nuts. These must be unscrewed. The lower left nut must be accessed through a hole next to where the trunk lid fits. (The screws are permanently attached to the lens housing so will not drop into obscurity when the nuts are removed). After removing the nuts, GENTLY work the lens housing away from the car. You may need a screw driver to unseat the housing, but just be gentle.
You will find three bulbs inside the lens. The brake light bulb is on the lower right side. Simply pull the old bulb out and insert the new one.
Just reverse these directions to reassemble the housing.
Posted on Jun 03, 2009
unscrew the case from around the light pull the case off and then youll have access to the bulb take the bulb out usually turns counter clockwise replace with new one reverse the process.
Posted on Nov 14, 2009
The entire bed line will need to be removed. The long screws that hold the metal bracet where the bed extender attaches also hold the tail light assembly in place.
I pulled the bed liner up at a 45 degree angle and layed it on top of the cab. This revealed the screws. Take both screws out and lay to the side along with the metal bracket for the bed extender.
Now firmly grab the edges of the tail light assembly and pull...there are 2 hard rubber nipples that snap in to hold the assembly. You will feel like you might break it but you won't..just pull straight back hard. The assembly will "POP" out and then you can just twist the back of each bulb there are (3) and pull out..now you will see the bulbs..just pull the bad bulb straight out and push the new one into place. Now just reassemble. Total time will be 30-45 min. for this repair.
Posted on May 04, 2010
Tips for a great answer:
Apr 07, 2012 | Saturn Cars & Trucks
Jan 31, 2011 | Buick Park Avenue Cars & Trucks
Feb 17, 2010 | 1999 Nissan Quest
Jan 23, 2010 | 1997 Ford Escort
Jan 14, 2010 | 2002 Lexus SC 430
Nov 14, 2009 | 1993 Honda Accord
Oct 20, 2009 | 1996 Lexus LS 400
436 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: