Question about 2001 Hyundai Elantra

1 Answer

Washer pump leak

I need to replace the washer pump on my 1996 Oldsmobile 88. Can you help? Thanks.

Posted by on

  • yadayada
    yadayada May 11, 2010

    what do u want to know?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 49 Answers

Pump will cost you about $60 from a dealer. Less from Pep Boys
On Driver's side under hood. See diagram below

washer pump leak - 84856fe.jpg

Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get the pullie off of a 1996 Oldsmobile 88 water pump


There are 4-8 mm bolts holding the pulley on. Usually, you can hold the pulley by hand while breaking them loose. If they are too tight or you can't hold it tight enough, leave the serpentine belt on to help hold the pulley while you begin to loosen the bolts.

May 12, 2012 | 1996 Oldsmobile 88

1 Answer

Where is the cradle frame in a 1996 oldsmobile 88 ?


You may be referring to the engine cradle mount. We were just told ours was bad. Upon my own inspection, the 4 bushings/washers/bolts parts are worn/missing. If you look just behind front wheels, you will see those bushings plainly.

Apr 19, 2011 | 1996 Oldsmobile 88

1 Answer

I have a 1996 Olds 88 LS that is hard staring


one of the common causes of this is a defective electric fuel pump.

Jun 09, 2010 | 1996 Oldsmobile Eighty Eight

1 Answer

85 88 royale. Last summer replaced 1 of the valve


She should still have some life left in her. The water pump isn't too hard to replace, really no special tools needed. When motors get around that mileage, they will use some oil and have some leaks. As the engine wears, blow by developes and will cause gaskets to leak. I would also check the PCV valve.

Jun 06, 2010 | 1985 Oldsmobile Delta 88

1 Answer

How do replace the power steering pump on 1996 oldsmobile delta 88


remove the pressure and return line, the belt, remove the mounting bolts. Use a "power steering pulley puller" to remove the puller. This tool also works as an installer.

Apr 16, 2010 | 1996 Oldsmobile 88

1 Answer

1996 Oldsmobile 88, where is the flasher unit so I can replace


I believe it is under the glove box door between it and the ashtray. You'll have to remove the panel under the dash (no big deal) and it is in a metal clip attached to the dash panel. Good Luck

Feb 14, 2010 | 1996 Oldsmobile Ninety Eight

1 Answer

Washer fluid reservoir will not fill. leaks under car. cant hear the motor when trying to wash windsheild. cant find the part to replace help


You may have a hole in the reservoir bottle or in the tube from the bottle to the pump.
Another possibility is that the tube has become disconnected from the bottle.

If you don't hear the motor, it may not be running or lost power.

Apr 01, 2009 | 1999 Oldsmobile 88

2 Answers

Replacing a power steering pump on a 1996 Olds Delta 88 Royale


3 bolts should be holes in the pully too go thru with an extension if their are no holes in the pully then you nee a power steering pump pully remover it can be rented for 5.00 at auto zone

Feb 23, 2009 | 1996 Oldsmobile Eighty Eight

1 Answer

LOOKING FOR A FUEL RELAY ... HELP....


the fuel relay is under the hood.

Feb 04, 2009 | 1996 Oldsmobile 88

Not finding what you are looking for?
2001 Hyundai Elantra Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...