Question about 2004 Toyota Highlander

1 Answer

Directional signals make vitually no audible when clicking

I have found that the directional signals on my 2004 Toyota Highlander make virtually no clicking sounds when signalling a turn. End result is some near misses when the signal has been left on after a 3/4 turn. I have a Camry and do not have this problem with that car. The turn signals click loud and clear.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 229 Answers

There is a turn signal switch device found under the dash that can sometimes be placed in an area that impedes the sound from reaching the driver. Turn the signal on while parked and in a safe area and listen for the source of the turn signal sound under the dash. Many times they are found along the steering column. Use a long screwdriver touched on the actual assembly and place the handle to your ear to verify that this is the correct assembly. If it is and it's not blocked somehow, check with a parts store for a replacement and tell the you would like one that has a substantially louder indicating sound. They should be able to accommodate and once replaced should resolve this safety issue.

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Ford Ranger - My break lights and directional signals are not working. My head and tail lights do work. Any advice on what I should check?


Most common is a bad signal light/multifunction switch failure. The brake lights are wired into the signal light circuit within the switch

Apr 09, 2016 | 2004 Ford Ranger

1 Answer

How to turn off check VSC in my Toyota Highlander 2004 model


for what its worth, my lights came on on my 2001 Highlander, I found this on the top back drivers side of air box.
turn-off-check-vsc-in-toyota-highlander-aaaceap5pquydtc10eehgnu0-5-0.jpg

Aug 28, 2015 | 2004 Toyota Highlander

1 Answer

How do I replace 2004 Toyota Highlander Alternator


not an easy diy write up in this fixya format

time to purchase a repair manual for the highlander

SHOP MANUAL HIGHLANDER SERVICE REPAIR TOYOTA BOOK HAYNES CHILTON WORKSHOP...

Jul 27, 2014 | 2004 Toyota Highlander

1 Answer

Hazard lights not working, fuse checks out OK


if you have directional lights and no 4ways you need a( signal stat ) some are round some are square you will find it most likely under the dash board turn on the directional listen to ware the sound is cumming from you will find 2 of them 1 for directional the other for 4 way

Apr 24, 2011 | 2000 Toyota Land Cruiser

2 Answers

Can I force enable vitualization?


No, if it's not on the BIOS you can't start it. You need a new BIOS for that.

Nov 28, 2009 | Cars & Trucks

1 Answer

2004 toyota highlander-replace cables on


hello sir, check there might be some dirt struck on the roof railing..!!


oil the things for lubrication leave for some time, n then check..!!

if it still doesnt work then check he power supply to the motor used for the roof...!!


thank u sir..!! if u feel my solution is worth reading then plz vote/rate me sir..

thank u!!

Jul 17, 2009 | 2004 Toyota Highlander

1 Answer

Help opening fuel cap for toyota highlander


turn it to the right and it just clicks? Turn it to the left and it won't turn, right? Well put some muscle into it and make it turn too the left, your dad undoubtedly turned it abot 5 clicks past stop and it's just tight. It will turn, Good luck.

Jun 03, 2009 | 2004 Toyota Highlander

1 Answer

Fuse location for directional and emergency signal


The TS flasher and 4 way flasher use different fuses. I'd test the flasher assembly located near the fuse box under the dash. One blown fuse won't disable both but a bad flasher module could,

May 03, 2009 | 2000 Toyota Camry

1 Answer

DIRECTIONAL SIGNAL FLASHING QUICKLY


This is caused by a burnt out bulb in the front or rear.

Oct 31, 2008 | 2004 Pontiac Grand Am

Not finding what you are looking for?
2004 Toyota Highlander Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...