I have a code P0108 & P0117 on a 2001 Honda accord

It is 'P-Zero', not P-Oh.

Location

https://www.google.com/search?q=2005+ford+crown+victoria+police+interceptor+map+sensor+location

The issue

P0108 - OBD-II Trouble Code - RepairPal

https://repairpal.com > obd-ii-code-p0108
Code P0108 sets when the voltage to the PCM from the MAP/Baro Sensor Circuit stays above 4.5 volts for 10 seconds or more when the values from the Throttle ...

P0108 - MAP Pressure Circuit High Input - OBD-Codes.com

https://www.obd-codes.com > p0108
If the PCM sees the voltage reading from the MAP sensor is greater than 5 Volts, or if the voltage reading is higher than what the PCM considers normal under ...

PO 748
service the transmission .....check solenoids

- Dirty transmission fluid - Low transmission fluid level - Faulty line pressure solenoid valve 'A' - Line pressure solenoid valve 'A' harness is open or shorted - Line pressure solenoid valve 'A' circuit poor electrical connection

Read more: http://www.autocodes.com/p0748.html

P0108
is the code for a problem with the MAP electrical circuit sensor having too high voltage input to the Engine Control Unit (ECU). This means that the voltage input to the ECU is too high and that it is not in the correct range for proper engine operation to work with inputs from the Mass Air Flow Sensor (MAF) and Throttle Position Switch (TPS). P0108 OBD II Trouble Code Manifold Air Pressure MAP Barometric Pressure...


odyssey map sensor is on the throttle body

Map sensor

Hi Jim,here's a link to your P0108 code. P0108 Honda Manifold Absolute Pressure Sensor Circuit High Voltage

Use your computer Google or whatever & type:

OBD PO107

Just learn how OBD2 Systems work, because codes
have nothing to do with installing parts

You have to know how the vehicles systems & components
work & how to test them

You only replace parts when you find a problem & a part fails
a test or data is not correct

You need knowledge & professional scan tool to even work
on any vehicle since 1981

here is the code table: code table, hope it can help you

check map senser for vacuum and wiring

P0171: Fuel injector system too lean Bank One:
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjG2vbN9cLZAhVSTt8KHUIOA7wQFggpMAA&url=https%3A%2F%2Fwww.autocodes.com%2Fp0171_acura.html&usg=AOvVaw1kDKs4sz1FfjNe-jwLQnEW

P0108: Barometric pressure circuit high:
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwj_5KPb9cLZAhVxQt8KHQTQBXIQFggpMAA&url=https%3A%2F%2Fwww.obd-codes.com%2Fp0108&usg=AOvVaw0WeZWiPFpb0IpxEI1gnk1n

Until the problem is repaired the codes will come on

it could be the coil or distrubutor cap

Code P0108 means your MAP sensor circuit is open. MAP means Manifold Absolute Pressure. You should be able to buy one at your local parts store - otherwise, the dealer.