Question about 2006 Toyota RAV4

1 Answer

Replacing driver side mirror

How do I remove the inner door panel to replace the driver side mirror for a 2006 Rav 4?

Posted by on

  • Anonymous Mar 27, 2014

    I need to remove doorpanel to replace the wing mirror on the drivers side

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Take off side door panel, screws securing it are revealed, unscrew screws remove them and and the mirror drops off. If the wing mirror is on the bodywork, then the screws should be either in the wheel arch or under the bonnet.

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

1 Answer

How do i replace drivers side mirror 1996 acheva 2 door power mirror


remove inner panel and unplug accessorie plugs then remove three nuts on door connecting mirror to door unplug electrical plug for mirror reverse assembly

May 28, 2011 | 1996 Oldsmobile Achieva

2 Answers

Replacing hummer h3 driver side mirror assembly


want to buy a cheap driver's side mirror for h3 model 2006

Oct 19, 2009 | 2006 Hummer H3

1 Answer

I need t take off a drivers side wing mirror


you may be able to remove the mirror inner trim panel (small triangular shaped trim piece above door trim panel)
to access the mirror mount.
If not then you will have to remove the trim panel for access to the back side of the mirror

Aug 26, 2009 | 2003 Toyota RAV4

1 Answer

Need to remove the right front door panel of a 2007 RAV 4


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Mar 19, 2009 | 2007 Toyota RAV4

1 Answer

Broken RH Side Mirror Raplacement


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jan 05, 2009 | 2006 Suzuki Forenza

2 Answers

Heated side view mirror repalcement


http://www.justanswer.com/questions/26bfw-lh-mirror-replacement-2006-dodge The harness needs to be attacked from the top of the dashboard to find this connector. Remove the pillar trim and then the dash panels to find the connector for the mirror.

Nov 18, 2008 | 2004 Dodge Grand Caravan

3 Answers

Replacing RH Side view mirror on a 2006 Toyota Sienna


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jul 29, 2008 | 2006 Toyota Sienna

1 Answer

REPLACING DRIVER'S SIDE MIRROR ASSEMBLY


If you remove the door panel, you'll see the screws that hold the mirror on. Remove them and the mirror will come right off.

Jul 02, 2008 | 2006 Ford F-150

Not finding what you are looking for?
2006 Toyota RAV4 Logo

489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63579 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...