An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: how do you get the inside dr panel of a hyundai...
Probably hard to see, or you'd have seen it. But there should be a clip just behind the center of the window crank. If you puch the door panel back away from the winder, you can take a curved pick and slide it out one way. It is open on one end, so you must slide it away from this opening. It sort of looks like a clip shaped like an open fish mouth. Need a tiny pick to hook it and pull it out sideways. Good luck. TT
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You first must remove any attachments: window winder,door handle, etc. Look for any screws all the way around the outside of door panel. Remove those. It should then just be a matter of carefully pulling outward on the panel until all clips pop free. Once it is free everywhere but up top, hold at the bottom and push/wiggle upward to free it from the top of door where the window is.
You appearantly have no idea what you're talking about.. This is the first sign you CAN NOT repair this yourself.. Take the vehicle to a professional before attemping to unscrew things.. Personal injury can accure.. NO user serviceable parts...
It wont be pretty but examine other rear door and be familiar with retaining fixings,ie door grab handle , window winder , and any screw fixings .
Remove what you can and maybe the rear seat also (sorry) The window winder removal is easier than you think ! It's held on by a horse shoe shaped spring clip, remove with a simple shoe lace or narrow piece of cloth pulled in the opposite direction of the horse shoe clip.(don't loose) This is about as much as I can help you , after this it's a tug and pull (against snap fixxings) upward lifting motion of the panel. Good Luck
You have to take out the ash tray, and remove those two screws, then pop out the center dash trim. Careful, though, you have to take out a lot of the wiring inside of your center dash trim in order to pull it out for enough room to move the radio in and out. I'm doing this right now, actually..