- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Heater is controlled by a fan switch located in your dash panel, a resistor and a blower motor. If the fan is not working the first place to check is the resistor which is located behind the dash panel in the plenum. The way to check this is remove the plug and insert a jumoer wire, if the fan runs the resistor is bad.
if you are going to replace your belt and you get it at Autozone,the belt routing will be on the package,but you need to check the automatic belt tensioner to see if it is still spring loaded,it bust not be since your belt came off,
you dont need remove the fan or the fan shrow you can put the belt on by looping the belt partially on a fan blade and then turnning the fan blade kinda like a bicycle chain and if it is the power steering belt there is a guard over the top of the pulley just remove the 2 10 milimeter bolts and it will come right off
There is a belt diagram on the emission sticker under the hood, if it is not there I suggest you get an Escort repair manual. I have searched the Web and am unable to come up with qa diagram of the belt.