- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check your sway bar links, the two bars at each end of the sway bar, connecting to the lower control arms. Sometimes you can spray them with silicone. Most likely have to replace them. Hope this helps. TJ
Usually squeaks are rubber bushings that need liquid soap lubrication. The anti-roll bar bushings and end links are common sources. So is the lower arm bushings that work with the strut assembly. Suggest getting under the car while someone pushes down on the front end to get it squeaking. Good luck!
Both the shocks and bushings can cause the squeaking noise. It is very common in those vehicles, and the best bet for figuring out which one is this: put some brake fluid in a squirt bottle, and put a small amount(don't get overzealous with it, as it will remove paint) on all the rubber bushings, and drive it around a little to get it worked into the joints. Brake fluid is designed to work as a lubricant in brakes without degrading the rubber parts, so it is excellent in lubricating the rubber suspension parts. If your squeaking remains, then it is probably the shock. This diagnosis, of course depends on if the squeak is that really obnoxious rubber squeak noise that comes when you push down on the front end and make the suspension travel. If the squeak is the high-pitched one that is constant when driving, and doesn't change except with speed, then it is your brakes telling you that they need new pads.
Okay....I have been working on my boss' car for a week with this SAME issue....first....try to figure out the spot it is coming from. This part is the pain. Second, have a can of WD-40 and spray it into any joint you find. This squeek could be from an upper bushing, a lower bushing, an A arm bushing, or any other bushing on that side....so start out with this method first because it will only cost you a few dollars, or free if you have it already. But do one at a time till you find it. Then, you'll know what item to replace.