Question about 2007 Mercedes-Benz C230 Sedan

1 Answer

To replace at plug adapter for mercedes c240 year 2005

I would like to know how to replace at plug adapter

Posted by on

  • mesnamie Feb 11, 2009

    I am talking about automatic transmission plug adapter,located in front right corner of a.t.It is leaking transmission fluid,so I think it is need to be replaced.Thanks.P.s.Dealer named it front caster bushing.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Hello, If you are talking about the suppressor that connects to the spark plug try this. Disconnect suppressor from plug, take a small screwdriver etc. and pry the top part of the boot slightly away from wire, spray some silicone lubricant in between the wire and boot, hold the wire in one hand and the suppressor in the other, unscrew the suppressor from wire, remember, lefty loosy righty tighty.
When installing new one, lube the wire and the suppressor and screw back together until snug. Do not over tighten.
If you find this information to be correct would you please enter a "fixya" rating.
Thanks, Gator241

Posted on Feb 11, 2009

  • Wally Wicker Feb 11, 2009

    Hello again, If you would have told me that it was at the trans, I could have helped you better.
    The thing that you are talking about is part of the trans control system, not a caster bushing, and needs to be replaced. I am surprised that you aren't having any trans shift problems. It's not the connector leaking but the device itself.
    If you find this information to be correct would you please enter a "fixya" rating.
    Thanks, Gator241



×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the transmission control module for a 2002 Mercedes benz c240


it is integral to the transmission , i've put a link to a video , shows the basic procedure so you will know if it's something you could do or get a mechanic
Mercedes Benz Transmission Control Module Replacement

Apr 08, 2015 | Cars & Trucks

1 Answer

Where is the Throttle Body Located on Mercedes C240


is the your car is after year 1997 up to 2005. it's v6 engine engine no should start from 112 that's the Mercedes Benz specification, if your car between same manufacturer model, open air cleaner Carrier on engine pull upwards and have a look at back side of the engine, you can see black color air flow meter fitted on back side the engine, that air mass sensor has fitted to the throttle body, if your car don't have the 112 mercedes engine need more details to find which engine belongs to your car, is this information helped you?

Oct 24, 2010 | Mercedes-Benz C230 Cars & Trucks

1 Answer

Belt diagram


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
I do not know if you have the C230 or the C240 Model. However I have included both Links below.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
For the C230:
http://www.2carpros.com/car_repair_information/year/2002/make/mercedes-benz/model/c230/2002_mercedes-benz_c230_drive_belt_routing_diagram.htm
For the C240:
http://www.2carpros.com/car_repair_information/year/2002/make/mercedes-benz/model/c240/2002_mercedes-benz_c240_drive_belt_routing_diagram.htm

Dec 24, 2009 | 2002 Mercedes-Benz C-Class

1 Answer

How to replace mercedes c240 trunk lamp bulb


Pry the lamp assembly off with a flat screw driver, you must pry it off from right to left only. do not pry in front or back or on the left because you will damage the assy. This works for a MB c240 2005.

Dec 10, 2009 | 2007 Mercedes-Benz C-Class

1 Answer

How to replace air filter in a Mercedes benz 2005


Hi, The air filter is located under the engine cover. Just lift off the cover and access the 20mm torx bolts under the cover.

Mar 08, 2009 | 2005 Mercedes-Benz C-Class

1 Answer

2005 Mercedes C240; looses power and check engine light comes


better to bring your car to dealer to avoid replacing part.,better to check air mass sensor or idling actuactor.

Feb 10, 2009 | 1995 Mercedes-Benz C-Class

4 Answers

Replace Cabin Filter in my 2002 C240 Mercedes Benz


I have a 2002 C240 Mercedes and need to replace the cabin air filter. Problem, I don't know were it is located or how to replace it. Can you help me.

Jun 04, 2008 | 2002 Mercedes-Benz C-Class

Not finding what you are looking for?
2007 Mercedes-Benz C230 Sedan Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...