- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the p0325 code pertains to a knock censor. the p0340 is for your cam shaft sensor. i've had this problem before. try replacing the cam shaft censor first and run the codes again to see if the other still comes up. it should fix the problem. hope this helps
P0732 Gear 2 Incorrect Ratio P0720 Output Speed Sensor CKT Malfunction P0736 Reverse Incorrect Ratio P0500 Vehicle Speed Sensor Malfunction P0700 Trans Crt l System Malfunction P0731 Gear I Incorrect Ratio
CAMSHAFT POSITION SENSOR
2001 Dodge Truck RAM 1500 1/2 ton 2WD 5.9L SFI 8cyl
The Camshaft Position Sensor is located:
Under hood, center, upper engine area, rear of intake manifold, mounted in distributor
If this is helpful.Please leave ositive Feedback. Thanks, SnugglePants
Had the same problem before on my 04 Neon SXT...camshaft sensor is on left side of engine block, take out the battery and to the left of it (face car) is the camshaft position sensor. To change it you'll have to move a few hoses but its plan to see there on the left side of the engine...pretty easy remove and replace. Fixed my problem of car not going above 2k RPM when i replaced the sensor.