- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove bolts to calipers, slide up, press back pistons inside calipers, remove pads, reinstall pads and reinstall. If you want a step by step diagram, go to autozone.com then register for free and then go to vehicle repair guide and you will have an entire online repair manual
Front brakes on all modern cars are disc brakes. The front brakes generally provide 80% of the stopping power, and so tend to wear faster than the rear. Replacing them - pads, rotors and calipers - is quite simple once you understand the process, and can save you a great deal of money. These instructions will include a full front brake replacement. Also, having a service manual for your vehicle will save your sanity, as well as time and money. If you only need pads, or pads and rotors, but not calipers, skip the steps for replacing calipers. Repeat the steps below for each side of the car as necessary. Complete Directions
Click on the following free direct Link. It has several Diagrams including the correct Serpentine/Drive Belt Diagram for your 1996 Nissan Sentra 1.6L DOHC In-Line 4-Cylinder. Included are Instructional and Directional Diagrams including how to remove/replace your Alternator Belt and set the proper Tension.
Timing belt is between the engine block and all your other pulleys is the best way to explain it. You will have to remove all your pulleys and water pump and belts and fan and shroud and radiator inorder to do this without pulling motor. You can go to autozone.com and register for full free online repair manual with diagrams, step by step directions and much more.Everything you could need
You can try a couple of things. First the most common is try spraying it with something like WD40 or get a breaker bar which will give you more power to turn it and will add alot more tension so the bolt will break loose. Could be that the heat seized it there but try these steps.