Question about 2000 Hyundai Elantra

2 Answers

Any help on replacing the drivers side cv joint

2003 elantra

Posted by on

  • Anonymous Feb 11, 2009

    we are trying to replace the driver side axle, but can't get it free. Any suggestions???

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 63,637 Answers

Remove the large nut on the end of the axle, unbolt the strut from (tie it out of the way with bailing wire, avail from any hardware store) the steering knuckle, pull the steering knuckle out of the way while pushing the axle stub inward and out of the knuckle, once the axle is free of the steering knuckle the axle just snaps out of the transmission, this can really be a bear, but it does just snap in and out, it uses what is called an internal snap ring to retain it into the transmission, u might also want to replace the axle seal as it most likely will suffer damage when u pull the axle out.

Posted on Feb 10, 2009

  • yadayada
    yadayada Feb 10, 2009

    here is a picture


×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 337 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a 2003 Hyundai Elantra GT have antilock brakes


Yes they have abs sensors are located on the hub

Sep 29, 2014 | Hyundai Motor 2003 Elantra

1 Answer

Just installed new rotors,brake pads, bearings and tie rods to front of 2000 montana. have a whopping sound when driving , this goes away when wheels turned slightly right. when turning right corner hear a...


One of your CV joints are bad, inspect which CV joint needs to be replaced. Roll your windows down and make tight right and left corners in an empty parking lot slowly and listen for the clicking noise. If it's coming from the passenger side window or the drivers side window, which ever side the noise is coming from is the side that the CV joint has failed and will need to be replaced.
Thank you for using FIxya and replacing the front wheel bearing improperly buy hammering the CV joint out instead of using a wheel bearing puller will cause damage to the CV joint as to what you have described. Good luck and keep us posted.

Jul 20, 2010 | 2000 Pontiac Montana

1 Answer

I replaced both front end bearings and now it makes a cliking sound on the driver side. It only makes that sound when the wheel is turned completely to the left or right.


Hi:
The clicking is most likely one of your front axle CV joints. Did you use a torque wrench when you reinstalled the axle nuts? If not, you should loosen both sides and torque to the proper tightness. Hopefully that will fix your problem. If not, then you could have a CV joint that has wear, and is causing the click.

Apr 19, 2010 | 2003 Dodge Durango

4 Answers

My dad wants to know if the seal on the cv joint can be fixed


not worth the effort, the joint is probably worn anyway, the whole axle shaft only costs probably 80 bucks remanufactured compared to 30 bucks for a boot kit you have to dismantle the axle to install with special tools anyway.

Dec 05, 2009 | 1998 Hyundai Elantra

2 Answers

2005 mini cooper knock felt through steering when turned to right noise does not continue on hard lock


Problem with a CV joint that is worn as it seem that the noise is heard only on partial turn. Try to find from which side the noise come from and replace the CV joint. Not serious if noise level is low and can be used if you do not mind the noise. Check however if the booth (cover) of the joints are intact and are filled with lubricant. Replace as soon as you can

Nov 19, 2009 | 2003 Mini Cooper

1 Answer

Hyundai 2005 Elantra cv boot replacement instructions.


There are no instructions available except with the purchase of SOME boot kits. Depending on the CV joint design, you may not be able to remove the joint from the axle. However, most Hyundai CV joints can be removed from the axle by using a drift and a 2 pound hammer to knock the joint off the axle. Once you've done this, it's a simple matter of removing the old boot and installing the new one w/fresh grease and tension bands. Otherwise, you have to remove the DOJ from the other end of the axle and replace the boot that way.

Aug 24, 2009 | 2005 Hyundai Elantra

2 Answers

Drive Axle Vibration


prob have a bad shaft, not balanced properly

Feb 18, 2009 | 2003 Chevrolet Malibu

2 Answers

Cv joint on 1990 mazda 626 drivers side


NOT THAT HARD A JOB JACK UP PUT STANDS UNDER FOR YOUR OWN SAFETY UNBOLT CV AROUND 5 BOLTS ON EACH END WITH SOCKET REMOVE BOLTS WITH CAR IN FIRST GEAR OR PARK THEN PUT IN NEUTRAL TO MOVE CV BOLTS AROUND SO THEY ARE EASIER TO GET TO ONCE REMOVED REPLACE WITH NEW ONE AFTER 100KMS CHECK THAT BOLTS ARE STILL TIGHT A SMALL TIP IF REPLACING ONE CV DUE TO WEAR ALSO REPLACE THE OTHER ONE AS WELL AND THERE IS A PRODUCT MADE BY LOCKTITE THAT YOU PUT ON THE NEW BOLTS TO STOP THEM FROM COMING LOOSE WHILE DRIVING PS THE BOLTS WILL BE TIGHT PUT A PIECE OF HOLLOW PIPE ABOUT2 FOOT LONG OVER END OF SOCKET HANDLE FOR HEAPS MORE POWER HOPE THIS IS HELPFUL GLENN........

Nov 15, 2008 | Hyundai Motor 1999 Elantra

1 Answer

Replacing Outside Driver's CV Joint Boot


yes but youl have to give it a good whack with a "brass hammer" so you dont mar or damage the joint

Sep 07, 2008 | Hyundai Motor 1999 Elantra

Not finding what you are looking for?
2000 Hyundai Elantra Logo

946 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

63574 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...