Question about 1991 Yugo GV

Open Question

Fuel issue?? i've got a 91 YUGO GV and just recently this issue started i turn the car on and it idles fine but when i press the gas it just revs and hesitates like vrooom pause vrooom pause vrooom pause vrooom pause etc. then i let off the gas and it idles fine but when i press the gas it does the same thing because of this it is undrivable can anyone help me out?

Posted by on

  • amir isic May 11, 2010

    check distrbutor fol losen pointsand ceck also condesor on seide of distributor , low rpm ok hi rpm bad.unplug weire of distrbutor clinit.if that dont work email me

×

5 Suggested Answers

chiquititas
  • 1010 Answers

SOURCE: Yugo GV 1991 parts fit in Fiat X1/9

I have a 1991 Yugo GV that I bought for the chassis, it is being converted to electric. I believe this motor and prehaps other items may fit the Fiat X1/9 also.

Posted on May 15, 2008

johnjohn2
  • 5763 Answers

SOURCE: my neon started idling at 4000+ rpms and wont idle

check for major vaccum leaks and it none found then you may have a bad idle air control valve, that controls the idle start there, good luck.

Posted on Nov 28, 2009

  • 1 Answer

SOURCE: firing order

1342 is correct but 1 is at the 10 o clock position not 7 oclock
ours is an 88 gv

Posted on Feb 06, 2010

  • 58 Answers

SOURCE: I have a 1991 Yugo Gv Plus that starts to cease

check and replace the fuel filter on it. if if has been pluged up for to long causing the engine to run lean for too long it could have caused catelist problems too. if both are fine check fuel pressure and check the fuel pressure regulater,.

Posted on Mar 10, 2010

  • 4793 Answers

SOURCE: need to know how to

i havnt worked on a yugo in years....undo all 3 bolts on the front and the one at the back of the alt and remove(leave the belt in place if you want to)
then just lift it out,you will see that it has a long "arm"this is for belt adjustment when replacing the belt,to tension it. 1/2"play on the longest run.between pulleys..

Posted on Sep 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89 chevy s10 misfires and sputters when i give it gas, dies when i stop. Sometimes it runs fine, but recently it's just been bad. When i rev the engine it can stabilize the idle, but usually die


check fuel pump pressure- fuel filter --air filter --egr valve if carboned up clean or replace and cat converter feel the exhaust if feels restricted may be clogging up

Mar 30, 2013 | Chevrolet Blazer Cars & Trucks

1 Answer

My Toyota Quantum 2.7GL idles but does not rev up. i ve changed the fuel pump and filter but still it starts, idles but does not rev up when you press the accelerator?


We do not have this model in US, but I assume it is a new model 2016-17. You throttle (and the "rev" ) is controlled by the computer. The fact that your car is idles - should mean that your computer is fine! There are two types of idle control: 1st- when you have a bypass of the throttle, which lets the throttle flop stay close while idling and let's the air into the motor through a bypass and electronically controlled idle switch. Inspect your throttle - the electronic/metal unit located on the large pipe through which the air gets into the motor: if you have a "bypass" for the air then you need to inspect your throttle body as it could be your problem.
2. most likely you do not have a bypass and your idle is controlled by your throttle body, then it is sure working fine and your only issue is that your engine computer does not know that you press the accelerator. Your gas pedal has an electrical unit on it which connects to the engine computer- inspect the connector/wires if all looks fine most likely your accelerator sensor does not work- you need to change the gas pedal unit ( I think it called accelerator sensor).
Good luck.

Jan 05, 2013 | 2007 Toyota Quantum 2.7

1 Answer

I have a 1991 Yugo Gv Plus that starts to cease when i open up the throttle, it also hates to start.


check and replace the fuel filter on it. if if has been pluged up for to long causing the engine to run lean for too long it could have caused catelist problems too. if both are fine check fuel pressure and check the fuel pressure regulater,.

Mar 10, 2010 | 1991 Yugo GV

2 Answers

91 isuzu trooper no acceleration


check fuel pressure possibly too low fuel pump not pumping enough

Jun 14, 2009 | 1991 Isuzu Trooper

1 Answer

Idle problems driving me insane


IAC -idle air control sensor!! known to be faulty in 91 accords.

Sep 17, 2008 | 1991 Honda Accord

1 Answer

1989 yugo gv


I would check the throttle body and change the fuel filter to start, also a disconnected vacuum line can be problems too.

Sep 15, 2008 | 1991 Yugo GV

1 Answer

Yugo GV 1991 parts fit in Fiat X1/9


I have a 1991 Yugo GV that I bought for the chassis, it is being converted to electric. I believe this motor and prehaps other items may fit the Fiat X1/9 also.

May 15, 2008 | 1991 Yugo GV

Not finding what you are looking for?
1991 Yugo GV Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yugo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Sam Akber
Sam Akber

Level 3 Expert

987 Answers

graybeard32301

Level 3 Expert

352 Answers

Are you a Yugo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...