- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have a 2004 Mk2 Scenic and when I bought it 18 months ago it was fitted with a non-Renault unit and that worked from the control stalks and showed up on the dash. I removed it and fitted the original unit back in as the previous owner wanted to keep the one that was fitted. I can't remember the make other than it was an expensive one. It was a straight un-plug the fitted unit and plug in the old one. No new wiring needed, so I am guessing that as long as you use the fitted plugs then the controls should still work. I hope that is of some help.
you can only put the code in if 4 zeros are shown if there are 4 dashes leave the radio on till the 4 zeros show can take over an hour then using the remote next to the steering wheel r/h side use the wheel to move the number up/down to the right number then press the button on the bottem to move to the next number after all numbers press and hold the bottom button to enter the code
On the controls on the steering wheel hold the vol + & - for a couple of seconds and this should bring up the 0000 on screen and then its a case of spinning the wheel control on the side and holding + & - to set it.
there is a wheel on your steering volume control.if your code is ,say 1234,turn the wheel down 1,untill 1 appears on the dash.under the wheel on the bottem is a butten,press once.the number on dash,should say 1 and the second number should flash.turn wheel again for second number,press button under nieth.3 and 4 the same way.ON THE FORTH NUMBER,HOLD THE BUTTEN UNDERNEITH UNTILL IT BLEEPS,RADIO SHOULD NOW BE ON MEGANES CLIO,R THE SAME , GOOD LUCK. STE A SCOUSER
you need to ring a renault garage with the chassis num. they will give you a 4 digit code. to enter the code yo must use the control for the radio attached to the steering wheel. if the code for example is 3456 you turn the wheel on the control until the first 0 reaches 3.then click the wheel towards your self to move to the next digit. hen you have all the digits in hold the wheel for approx 3 seconds to enter the code
ring a renault dealer with the chasis number. starts with vf1. located on the bottm of the winscreen on the passenger side. use the radio control on the steering wheel to enter it. the wheel on the control. eg. if the coe is 4673. rotate the wheel unil first 0 goes to 4. then click the wheel towards you move on to the next digit. when last num is inserted click and hold the wheel until radio returns. about 3 seconds