Question about 1984 BMW 5 Series

1 Answer

Where do u put transmission fluid in a bmw 740il 2001

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 362 Answers

Here is the procedure:

The transmission temperature must be between 86° to 130° F (30° to 55° C) before checking With engine running, switch on AC While holding vehicle with brakes, place transmission into each gear briefly With engine running and transmission in park, remove Fill/Check plug. If a small amount of oil runs out, fluid level is correct. If no oil runs out fluid level is low, add fluid as required through Fill/Check plug hole. When level is correct, reinstall Fill/Check plug and tighten to correct torque.

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Whining power steering pump on 2001 bmw 740il


have you put a different type of power steering fluid?

in some instance, if they put a different type of fluid, the solution bubbles up and makes a whining noise when you use the car.

tnx 4 using fixya,

drcool

Oct 10, 2008 | 2000 BMW 7 Series

1 Answer

If there is inadequate of transmission fluid in my 2000 740iL will it move if I shift it to drive gear? Where is the transmission fluid hole in order to add some fluid?


Hi there,

Transmission Fluid is the lifeblood of your auto and considered to be the one of the most critical components for a good working transmission, as the chemical makeup & viscosity of the fluid helps determine correct pressure and shifting. For this reason, use only BMW specified fluid - DO NOT use any non-approved fluid.

Measuring correct transmission fluid level is done after the engine/trans has WARMED UP.

If you measured your transmission fluid level using a dipstick, then you generally add BMW spec fluid through the same tube as the dipstick. CAUTION: never overfill the transmission, as excess fluid will cause 'foaming' and this usually creates further shifting issues.

If you have determined the fluid is low, the trans components will still function, but any attempt to operate the transmission in DRIVE with inadequate fluid, will likely cause unneccessary damage.

If there is no dipstick present, then this model BMW (much like the Merc's) denies you the ability to change your trans fluid yourself. This is a precautionary measure by the manufacturer to prevent the owner from changing the fluid. Instead, the workshop will have a special tool to measure the fluid level.

Cheers,


"If this has helped you in any way, please rate this solution"

May 13, 2011 | 2000 BMW 7 Series

1 Answer

WHERE DO I PUT TRANSMISSION FLUID IN A 98 BMW 740IL


there is no tranmission fill cap on these models, transmission has to be serviced at a tranny shop.

Nov 27, 2010 | 1984 BMW 5 Series

2 Answers

How to add transmission fluid to 2000 bmw 740il


Hey

They don't put a fill tube on them . It's suppose to be life time fluid. Must be filled from the fill hole and the plug is on the right rear side of the trans.

Hope this has helped
.

Jun 17, 2010 | 2000 BMW 7 Series

1 Answer

Where do i find the transmission dipstick at


There isn't one. To check the transmission fluid level there is a plug that you must remove.The fluid should be to the level of the threads. See here http://www.bimmerboard.com/forums/posts/68013 or here http://tech.bentleypublishers.com/servlet/JiveServlet/download/66-15645-136704-1551/ATFCapacity.pdf

Jan 08, 2010 | 1994 BMW 7 Series

1 Answer

How is the transmission fluid put in a bmw 740il


put it down the dipstick hole for the trans.

Jul 27, 2009 | 1984 BMW 5 Series

2 Answers

What kind of power steering fluid is used for BMW


The cap to your power steering reservoir should either say ATF or CHF11s. If it is ATF you can use Dexron automatic transmission fluid. If it is CHF11s the dealer is the only place I know that sells it. There should be level marks on the cap stick.

Mar 19, 2009 | 2000 BMW 7 Series

Not finding what you are looking for?
Cars & Trucks Logo

1,233 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...