Question about 1999 Ford Explorer

3 Answers

Pcv valve :where is it located on a 1999 ford explorer sport 2wd

Where is it located on a 1999 ford explorer sport 2wd 4.0 V6 SOHC?

Posted by on

  • 1 more comment 
  • rbrandon Mar 02, 2009

    I also have this same problem. I checked everywhere on the engine and so far nothing! Some people have told me it's located on the driver side near the brake booster and nope, zero. The front of the engine on the right valve cover and still NOTHING. Is there anybody out there that knows exactly where it is located?????

  • orestes marrero Jul 27, 2013

    This where located if. Under the base of the battery, there is another tin of the guard mire in her but for below, already the comprobe directly and it me works, I made to him the relay of the woodpecker a bridge and it works, but from the helm NOT. If you discover something write to me. Thank you

  • Anonymous Mar 13, 2014

    1999 Ford Expedition 5.4 liter SOHC V-8 VIN "L"

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It is located at the back of the engine near the fire wall. It is gray with a T connector at the top with two hoses coming off of the T and going forward into the intake manifold.

Posted on Mar 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

Look For A 3/8 th's Vacuum Hose Coming from The Base of Throtle Body Fallow it to the 2 Line PCV At Valve cover

Posted on Feb 10, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 373 Answers

Try auto zone or advance auto

Posted on Feb 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2000 explorer 4.0 Soho do I have to remove the injectors to remove the lower intake


REMOVE UPER INTAKE 97 EXPLORER V6 4.0 - YouTube

? 12:22
https://www.youtube.com/watch?v=ugExJ0wkP8A
Jun 11, 2013 - Uploaded by Sum Guy
REMOVE UPER INTAKE 97 EXPLORER V6 4.0 ... I was told that all I have to do is remove the fan belt to get access to it ... FordExplorer 2000 intake manifold gasket upper lower P0174 by froggy - Duration: 36:54. by froggy 36,588 views ... Ford Explorer 4.0L SOHC Rough Idle P0171 P0174 Lean Codes ...

Putting the lower intake on my 1997 Ford Explorer 4.0 OHV ...

? 5:23
https://www.youtube.com/watch?v=qKE1vPxqPHs
Jun 27, 2010 - Uploaded by origionaldz
Putting the lower intake on my 1997 Ford Explorer 4.0 OHV sport .... I do have a 2000 5.0 ... @michaelheiland123654 To dothis job, you have to remove the alternator, unbolt the AC compressor, remove upper intake manifold, remove fuel rail,remove all injectors, ... Do you have the SOHC or OHV version?

1999 Ford Explorer 4.0L -need assistance on removing upper intake ...

www.automotiveforums.com > ... > Ford > Explorer ' Explorer Sport Trac
Sep 20, 2011 - 1999 Ford Explorer 4.0L -need assistance on removing upper intake ...Are you sure you have the OHV/pushrod engine and not the SOHC engine? ... Do youhave the upper intake manifold loose, you just are unable to ... the lower intake gasket, valve cover gaskets, Injector o-rings, plugs and wires. Thanks ...

How to replace upper intake manifold gaskets - Ford Explorer




Dec 09, 2015 | Cars & Trucks

1 Answer

I have a 1994 ford explorer sport, im trying to figure out whether or not its a 4.0L pushrod v6 or a 4.0L sohc v6


if the moter says sohc on the valve cover that means the cam is in the head but most ford V6 motors have the cam in the block making it have pushrods.

Dec 12, 2010 | 1994 Ford Explorer Limited

1 Answer

Need 2 loc8 PCV on 1999 Exploer 2WD 6CYL SOHC.


The pcv valve is typically located in the valve cover near the brake booster which is on the drivers side

Jan 20, 2010 | 1999 Ford Explorer

3 Answers

Where is the pcv valve located on a 1999 ford explorer? Is there a picture?


PCV BasicsPCV stands for Positive Crankcase Ventilation.
All car engines have a PCV valve and it is located on top of the motor's valve cover. There is a vacuum line attached to it. It pulls out of the valve cover and if you shake it, you should hear a marble knocking inside it. If you shake it and don't hear anything, it's bad. It costs less than 5 bucks to replace.

Location
  • 4.0L is located in the valve cover near the brake booster

  • 5.0L is located behind the intake manifold (engine rear)

Oct 04, 2009 | 1999 Ford Explorer

2 Answers

Firing order


that is true your firing order is wrong here is a link to a web sight that has all the 1998 explorers 6cyl just click on the one that your explorer is and it'll show you the correct firing order also make sure you have your plugs gaped right good luck.
http://autorepair.about.com/library/firing_orders/bl-ford-firing-98.htm

Mar 22, 2009 | 1998 Ford Explorer

1 Answer

2001 Ford Explorer Sport


pcv is on the back side(firewall) of the drivers side valve cover.held in buy lock tabs,turn then pull to remove.

Nov 10, 2008 | 2000 Ford Explorer

1 Answer

1998 Ford Explorer sport 4.0L 4x2 PCV Valve Location


the pcv is located on the rear(firewall) of the drivers side valve cover.turn counterclockwise and pull to remove be careful there are 2 small tabs inside the pcv hole in the valve cover(can feel with small finger) this is to hold valve in place so it wont leak.if you have a oil leak at the pcv a quick fix is to put a small amount of silicone around the pcv o-ring and install.wait hours for silicone to set up.

Sep 25, 2008 | 1998 Ford Explorer

1 Answer

How do i replace the pcv valve on a 2000 explorer xlt v6 sohc?


On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

A good source of information for Ford Explorers can be found here

Jul 22, 2008 | 2000 Ford Explorer

2 Answers

Pcv valve


Normally located on top of the valve cover.

Jun 24, 2008 | 2003 Ford Explorer

Not finding what you are looking for?
1999 Ford Explorer Logo

Related Topics:

1,457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...