Question about 2002 Volkswagen Golf

1 Answer

Door courtesy and door open lights don't come.

I've tried fuses an bulbs, can ayone suggest solution?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Hi probably you have an unplugged wire behind your door contact or this contact is broken. You have to go to an electrician or a specialist or to the dealer VW.
hope this helps you
sserpentio

Posted on Feb 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My interior light won't come on in my 1999 Buick Lesabre. I have checked the bulb & the fuse. Can anyone help me with this problem? Any ideas are sincerely appreciated.


Courtesy Lights
The courtesy lights come on under the following conditions:
?€¢
Any door is opened.


?€¢
The interior lamp switch is in the ON position.


?€¢
The keyless entry transmitter unlocks the doors (illuminated entry).

When the key is removed from the ignition switch with all of the doors closed, the courtesy lights light for approximately 25 seconds before fading out.
Battery positive voltage (B+) is applied at all times through the IP fuse block CTSY LP/PWR MIR fuse 6A via CKT 640 (ORN) through the body control module (MALL) to the courtesy lights via CKT 1732 (ORN). The MALL provides a ground through CKT 156 (WHT) for the courtesy lights under the following conditions:
?€¢
The MALL receives an input from a door being opened.


?€¢
The MALL receives an input from the interior lamp being turned ON.


?€¢
The MALL receives an input from the doors being unlocked using the keyless entry transmitter.

The courtesy lamps then light.
When the courtesy lights are activated by opening and closing a door, the courtesy lights will remain on for approximately 25 seconds before fading out after all of the doors are closed. If the ignition switch is turned to START or RUN within the 25 seconds, the lights immediately begin to fade out. If a door is left open, the MALL removes battery positive voltage (B+) to the courtesy lights after 10 minutes. When the courtesy lights are activated by the interior lamp switch, the lights remain on as long as the interior lamp switch is in the ON position. When the courtesy lights are activated by unlocking the doors using the keyless entry transmitter, the lights remain on for approximately 40 seconds. If the doors are locked using the keyless entry transmitter within the 40 seconds, the lights immediately begin to fade out.
Body Control Module (MALL) Diagnostic Mode
For a detailed explanation of the MALL module diagnostic mode, refer to Body Control Module Cell 51.
What interior light ? Dome , courtesy lights etc....They don't work with switch, keyless entry , door opening ?
What

Dec 03, 2015 | Buick Cars & Trucks

2 Answers

Interior lights not working


You mite have a DTC - diagnostic trouble code stored in the BCM - body control module , The BCM controls the interior lights ! Have you heard of a BCM ?
DTC B2615
The body control module (BCM) receives a ground signal from the door jamb, liftglass/liftgate, or courtesy lamp switches requesting courtesy/dome lamp illumination. When this occurs, the BCM directly sends a voltage through the courtesy lamp supply voltage circuit illuminating the courtesy/dome lamps.
Conditions for Setting the DTC
?€¢
When the BCM receives a courtesy lamp illumination request signal and the courtesy lamp supply voltage circuit is shorted to ground.

?€¢
When the BCM is not receiving a courtesy lamp illumination request signal and the courtesy lamp supply voltage circuit is shorted to voltage or open only to the first splice from the BCM.

?€¢
There is a loss of the rear fuse block TBC 3 battery supply voltage to the BCM for more than 1 second

Diagnostic Aids
?€¢
Perform a visual inspection for loose or poor connections at all related components. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems.

?€¢
Only an open circuit up to the first splice from the BCM will set DTC B2615.

DTC B3801
The body control module (BCM) monitors the courtesy lamp switch signal circuit in order to determine when the courtesy/dome lamps should be illuminated. When the BCM senses that the courtesy lamp switch signal circuit is grounded when the switch is activated, the BCM will directly illuminate the courtesy/dome lamps. Do you know what a scan tool is ? not a code reader !
Courtesy Lamps Inoperative




GM Tech 2 Training video 1996

Aug 24, 2015 | 2004 Chevrolet Chevrolet TrailBlazer EXT

2 Answers

The coutesy light does not come on when the door is opened every thing else works


If the bulb lights when another door is opened, replace the plunger switch in the jamb of the problem door.
If you are not getting a light when *any* door is opened, check your fuse (often labeled "Courtesy" or "CTSY" in your fuse box). Fuse box can be under the driver's side of the dash or in the engine compartment. Add a comment to your post with the year, make, and model of your vehicle for more specific details about the location of your fuse box, if needed.

Feb 12, 2015 | Cars & Trucks

1 Answer

Courtesy lights not working


Check to see if the fuse for the lights are burned out or the bulb in the light it self has burned out.

Dec 13, 2012 | 2006 Hyundai Santa Fe

1 Answer

Courtesy lights don't come on when door opens.


Try in this order:

Check bulb

Check all 4 switches (one on each door)

Check wiring to roof lamp, spray with circuit cleaner.

Feb 16, 2012 | 2004 Ford Taurus

1 Answer

1994 Oldsmobile Cutlass Supreme: My battery keeps draining, and I'm pretty sure it is caused by the courtesy lights not turning off when I leave the car. I would assume there is some sort of timer or...


I don't think there's a timer on your '94. It sounds like one of the door switches is stuck or not functioning. Try putting fuse back in. and opening and closing one door at a time to see if you can determine which door switch is bad. They are easily replaced. (Wintertime would make the switch operate even less optimally.)

Nov 07, 2011 | 1994 Oldsmobile Cutlass Supreme

1 Answer

The F11(interior cabin lights) circuit indicates a dead short. A 10A fuse inserted into fuse panel blows immediately. Parking lights no longer turn off when door is opened. The parking lights do not...


Check the rear hatch / door opening for a crimped or smashed wire in the hinge area. Check each door for same. The doors have courtesy lights and a wire can be smashed in the seal area. Next check any of the cig lighters or power outlets for user devices, coins or ink pins can blow fuses. They could be on the same fuse. Last check each light bulb for broken bulbs or any loose wires in the sockets .

Oct 17, 2010 | 2004 Hyundai Santa Fe

1 Answer

2003 Honda Pilot lighting problem


the driver's door has a switch which tells the multiplexer control unit that the door is open and the control unit then switches on the lights. It sounds like the switch is not making contact when the driver's door is open. The lights work and the other door switches work--so it isn't a fuse or multiplexer problem.

Feb 22, 2009 | 2003 Honda Pilot

1 Answer

Interior lights stay on


there is a setting for that in the electronic info center. use the menu button to cycle through options displayed on instrument panel near the speedometer

Dec 19, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
2002 Volkswagen Golf Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...