Question about 1990 Ford Bronco

1 Answer

Bronco wont stay running

1990 5.0 bronco, parked car and it was still running kept periodically starting then one day it wouldn't stay running only stays running when flooring and even that is shoty a best, it will still eventually conk out, im wondering if it is the fuel pump or something related

Posted by on

  • marvin8323 Feb 10, 2009

    changed fuel filter, and checked pressure right around 40

  • marvin8323 Feb 13, 2009

    changed fuel pump, fuel filter, fuel regulator, tps sensor, iac valve, getting spark, stays running with starting fluid, get pressure at fuel rail and still will not run on its own. checked for old gas and filled tank with new gas still will not run on it own

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,118 Answers

First thing, if its ben a while sense the fuel filter has been chg. do it. if that dosent cure it do a fuel pressure test. my best guess its filter or pump.

Posted on Feb 10, 2009

  • ccn7 Feb 10, 2009

    Weather its throuttle body or injection it needs more than 40, it should be around 48 to 50 on throuttle body and 58 to 60 on injection.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Backup lights come on and stay on when ever you turn on the headlights


problem is at the switch at the trans, you need to reajusted it

Sep 21, 2014 | 1990 Ford Bronco

1 Answer

Has spark, no fuel, wont start


auto shutoff relay is bad.. change it..controls pump and ignition..

Jan 02, 2014 | 1990 Ford Bronco

1 Answer

Parking brake


Sounds like the cable is not connected to the back brakes, or the lock pin is broke in the handle.

Jun 10, 2013 | 1999 Pontiac Sunfire

1 Answer

Truck cranks but won't start


If your fuel is running all the time the PCM is bad if you take your relay out and the fuel pump stays running its a short

Jan 06, 2013 | 1990 Ford Bronco

1 Answer

1990 automatic 85,000 miles- Shifter will not stay in park and will start jumping ahead if parked on an incline. Also, when starting the car, the key stays in start position- starting the engine and...


Check the shift cable for proper adjustment. Remove the console, put shift selector in N (make sure wheels are blocked), remove lock pin from cable adjuster, check that the hole in the adjuster is perfectly in line with the hole in the shift cable. (there are 2 holes in the end of the shift cable positioned 90degrees apart to allow for 1/4 turn adjustments) If not perfectly aligned, loosen the lock nut on the shift cable and adjust as necessary. Tighten the lock nut and install the lock pin in the adjuster. If the lock pin feels like it's binding when being installed, it's still out of adjustment and must be adjusted again.
The key staying in the start position: try spraying wd-40 or similar lubricant into key hole, if condition is the same, you will need to change the key ignition assembly, as it is worn out,

Aug 04, 2009 | 1990 Honda Accord

2 Answers

Car wont stay running, even with foot on the gas.


fuel pump is getting ready to shut down replace it.

Jan 13, 2009 | 1999 Pontiac Grand Prix

1 Answer

Car trouble


clogged fuel filter or cat convertor. replace fuel filter 1st

Nov 18, 2008 | 1991 Buick Park Avenue

2 Answers

Bronco Wont Start (help please)


Check for timing gear problems. They have plastic teeth on the cam shaft gear which will shatter causing it to jump time.

Aug 03, 2008 | 1981 Ford Bronco

Not finding what you are looking for?
1990 Ford Bronco Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5626 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...