Question about 1999 Ford F150 Regular Cab

1 Answer

Where is the O2 sensor on a 1999 Ford F-150?

MY truck won't pass inspection and the shop told my wife the O2 sensor needs to be replaced. I edon't know where it is, but it costs about $50.00 to buy the part and the shop qouted her $400.00 for them ti fix it. Also would this have anything to do with my drivers side air bag being on?

Posted by on

  • katkins998 Feb 09, 2009

    Thank You Very Much!!!!!!!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,479 Answers

Auto Zone has information on the O2 Sensor for your pickup here. It is located somewhere either on the exhaust manifold, or on the pipe leading from the manifold to the converter. If you're going to replace this yourself, get the special wrench to remove and replace it -- it's cheaper than having to get another sensor if you break the new one using the wrong tool.
This shouldn't have anything at all to do with your airbag.

Posted on Feb 09, 2009

  • old marine
    old marine Feb 09, 2009

    I just realized I didn't answer all of your question. If you go to this site, you can find out about what this job should cost in your area. Where I live, it would cost anywhere from $114-138 for a single sensor on a V6, to $256-312 for both sensors on a V8. (Dealers will normally charge more.) The site will also show you a number of independent garages in your area.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tried getting ford f150 4.2 2003 inspected. Replaced air filter and fuel filter already. Check engine lit was on before replacing them . Now check engine light is out . But won't pass inspection.


As for your codes p1131 and 1151: Ford - Lack Of Heated Oxygen Sensor Bank 1 Sensor 1 Switches - Sensor Indicates Lean


Last week I had the very same catalyst, evap and ECG codes come up on my 1999 Mercury Mystique which is like a Ford Taurus. A friend was able to find a hole or leak in the hose connected, replaced it and it runs fine. I havent run it a full and straight 50 miles yet to clear the check engine light but that repair alone changed the entire way the car was poorly driving. Im sure that hasnt fixed all the probs but thats a good starting point.

Mar 04, 2013 | 2003 Ford F150 Regular Cab

1 Answer

Trk won't pass inspection. It has the code PO420. catalys system below efficieny.


My father's 99 Suburban had a similar code for Bank 2(passenger side).Change the O2 sensors before and after the catalytic converter for the driver's side(cylinders 1-3-5-7).All four sensors are in the front section of the exhaust,just follow the pipe from the driver's side manifold to find the correct sensors.

Dec 08, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

1997 ford thunderbird won't pass inspection


has the cataletic converter been punched out to make it more like a resignator?

Jun 04, 2012 | 1997 Ford Thunderbird LX

1 Answer

Hi my check engine light is on and it wont pass inspection, gave it a tune up. I was told at the time i was tryin to get an inspection that the timimg belt was bad, took it for second opinion and i was...


hi what part of the inspections? emissions? normally if you have the engine light on and you have high emissions, this is normally due to a bad o2 sensor, but that's just a guess, you will be better off getting the code read on a diagnostic's machine to find out what the error is, the belt can and can not have things to do with it, if the timing was out that would have an effect but if the vehicle is running ok then i very much doubt that will be anything to do with it but like i said if timing is out it will...hope this helps

Jan 17, 2011 | 2000 Ford Contour

1 Answer

I have a 2002 hyundai accent in which the check engine light keeps coming on. I replaced the o2 sensor twice becuase I was told it was a bad o2 sensor and now the light is on again. any ideas---my...


you have more than 1 o2 sensor are you replaceing the one that is bad plus once replaced you have to drive for awhile for computer to reset itself

Dec 16, 2010 | 1999 Hyundai Accent

1 Answer

I have a 1998 ford windstar i have change the O2 sensor and harness. The check engine light is on and now the shop is telling me that it is the intake manifold runner control. Will it pass inspection with...


No. Unfortunately it wont pass. If you invested already over $450.00 in repairing the emission system you could pass it if you have proof for it.

Jul 21, 2010 | 1998 Ford Windstar

1 Answer

Replace front and rear o2 sensors to turn off


sounds about right at a shop the parts alone retail for about 300 then markup,labor,diagnostic, and after run(emmisions test)

Sep 03, 2009 | 1998 Volvo V70

4 Answers

I have a 2001 Santa Fe and the Engine light is lit and has been for many years. When I took the vehicle for the State Inspection I was told that the Co2 needed to be changed so the light would come off and...


The best thing to do is go to Auto Zone and get your Hyundai scanned for a DTC code. That would tell us which O2 sensor has gone bad. You have three O2 sensors and one of them has gone bad, the O2 sensor sends signals to the ecm to control the air fuel mixture so it will not run to rich or to lean which is causing you to fail the state inspection. Good luck and keep me posted on what the DTC codes are, be glad to help.

Jun 25, 2009 | 2001 Hyundai Santa Fe

3 Answers

Knock sensor 1996 v6 3.3 nissan pathfinder


The Crankshaft Position Sensor is located: Under hood, driver side, front engine area, mounted rear of crankshaft pulley
The Knock Sensor is located: Under hood, center, front engine area, below intake manifold, mounted on block

Jun 14, 2009 | 1996 Nissan Maxima

2 Answers

Autozone diag: Check eng light o2 sensor - is this a do it yourself job?


its not hard to change the o2 sensors but if they are baked in which means really hard to break loose u could have problems try spraying them down with p.b blaster and getting them out

Jun 15, 2008 | 1998 Toyota Avalon

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...