Question about 1994 GMC Sierra

1 Answer

94 GMC Sierra 4.3 L Manual "Steering Column"

My bf had his truck broken into and his steering column broken. Our Auto Insurance won't cover it and wants to write it off... So we are going to fix it.
Broken On column: TURN SIGNALS, WIPER SIGNALS, LOW BEAMS, IGNITION & THE BLACK PLASTIC CASING AROUND EVERYTHING
We know these are things we have to replace, so the real problem is knwoing all the extra little parts to get and how to fix it. If you have any ideas let me know!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,055 Answers

Just replace the whole colmn 100.00 at junk yard and about an hours work a lot eaiser than trying too replace all those parts

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My steering column wires


Donna, steering column wire diagram, check the attached links,instruction and guides, Good luck. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://alarmsellout.com/support/diagrams/vehicle/GMC%20SIERRA%201988-2005.pdf
Repair Guides Wiring Diagrams Wiring Diagrams AutoZone com
Wiring Diagram
1998 GMC Sierra steering column wiring diagram Google Search

Jul 20, 2016 | 1998 GMC Sierra

1 Answer

2005 gmc yukon denali xl was stolen trying too find out how much I'm looking at to replace steering column & ignition.


USUALLY COMPREHENSIVE INSURANCE PAYS FOR THIS DAMAGE. THE COVERS ON THE COLUMN AND NEW IGNITION WILL COST 700 TO 1000.

May 04, 2015 | 2005 GMC Yukon Xl Denali

1 Answer

I need an Illustrated Parts Break down for a 1989 GMC Sierra 1500. 350 w/ PS/PB loaded. Steering column Removal Repair or Replace


Hi.

Below you get all the parts breakdown for GMC Sierra 1500, including steering column assembly:

1500 SIERRA

Here diagrams for all 1989 GMC trucks.

If you need to take apart the steering column you will also need wiring. below the color codes and wiring tips:

GMC SIERRA 1988-2005 VEHICLE WIRING

Regards.

Ginko

Aug 31, 2011 | GMC C1500 Cars & Trucks

1 Answer

99 GMC JIMMY. STEERING LOCKS DOWN SOMETIMES AFTER 1/4 TURN OF STEERING WHEEL. CHANGED PS PUMP, CHANGED STEERING GEAR BOX, CHANGED DRAG LINK, CHANGED BALL JOINTS, NO SIGN OF PHYSICAL BINDING WHAT IS...


Could be steering shaft on bottom of column that connects column to gearbox. Rag joint or u-joints on shaft are dry or seized. Try spraying rubber rag joint & u-joints on steering shaft with a good penetrating oil like PB Blaster. Work steering wheel all the way to left,spray, then turn all the way to right & spray some more.

Mar 21, 2011 | 2000 GMC Sierra

1 Answer

Cant find 4 way hazard module 94 seirra


To find the FLASHER on 1994 GMC Truck C1500 1/2ton Sub 2WD 5.7L TBI 8cyl. the Flasher is located: Front seating area, driver side, under dash, driver side of steering column, mounted in relay bracket

Application: Hazard flasher


Turn SIgnal flasher is one independent unit.


Hope helps-

Sep 16, 2010 | 1994 GMC Sierra

1 Answer

1997 gmc sierra 5 liter 2wd pickup steering column switch[directionals,hazzards,etc]not functioning. IS replacing it DIY a tough job?


FOR THE DIY IT IS A RELATIVELY EASY TASK. THE STEERING COLUMN COVERS WILL NEED TO BE REMOVED FOR ACCESS TO SWITCH. THESE SCREWS ARE LOCATED IN BOTTOM OF LOWER COVER. HOPE THIS HELPS!!

Sep 07, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

On a 2003 GMC Sierra Durmax truck there is a clunking noise in the steering column or shaft when you drive down the road


There is a known problem in the intermediate shaft on these trucks.If you look under the hood on the right side of engine compartment,you will see the intermediate shaft connects to steering column and runs to the steering gear.

Aug 03, 2009 | 2003 GMC Sierra 2500HD

3 Answers

1989 GMC Sierra 3500 loose tilt steering column


Watch videos on youtube ( repairing loose tilt wheel)

Jul 19, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

Tow/haul light wont turn off


I have found that on three silverado's there is a plastic clamp on the bottom side of steering column where the wires become broken and can short out. You have to remove the column covers to see this, it should be claser to the lowe dash trim panel area needs a shifter to repair unless you can fix that little wire!

Apr 05, 2009 | 2000 GMC Sierra

Not finding what you are looking for?
1994 GMC Sierra Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...