Question about 1988 Mitsubishi Pickup

Open Question

Changing bulb how do i change the bulb behind the clock on the dashboard in my mitsubishi carisma

Posted by on

5 Suggested Answers

  • 2 Answers

SOURCE: how do i change the time on the clock

press the menu button for a few seconds...then it will say adjust clock...then just use the arrows to change clock...simple..even i can do it...

Posted on Apr 08, 2009

kader a oran
  • 1 Answer

SOURCE: Removing heater control in a Mitsubishi Carisma

slt cava

Posted on Jul 11, 2009

  • 2841 Answers

SOURCE: Hi There, I need to change my fuel filter on a

It is under the hood, on the driver's side, rear engine area, driver's side of the master cylinder, mounted in between the fuel line.

Posted on Aug 29, 2009

  • 1 Answer

SOURCE: 1999 Honda accord dashboard clock light

need type A T3 8mm base
http://superlumination.com/74.htm
http://superlumination.com/images/auto_bulbs/neoglass_all_wm.jpg

unless you want stock clear color i think at dealer its under $3

Posted on Dec 19, 2009

  • 1 Answer

SOURCE: change dashboard light bulb in 2002 Honda Accord EX V6

you will need fill up screw driver and a flat head remove the 2 screws that hole the BLK panel . then you use your flat head gently push up and out on the lower left and right coroners . be very carefull make sure you got time no rush. NOTE : make sure you go pick up the LIGHTS I USED sylvania lights part #74 LL YOU WILL NEED 14 OF THEM COST 4.99 FOR A SET OF 2 AND IF YOU HAVE AUTOMATIC CAR YOU WILL NEED CALL A HONDA DEALERSHIP AND FIND OUT IF THEY HAVE THE ONES THAT LIGHT UP WHEN YOU CHANGE GEARS.

  • after you got the BLK panel off you will see 2 gold screw do not take them off.
  • remove 4 BLK screw , two of them will be next to the gold screw . the other will be right on the top
  • after you got the screws off
  • stat pulling out the dashboard out slowly ..
  • after you see that the dashboard dosen't want to come out you should be able to see these 3 green wire connection one on the left , right and one in the middle
  • I use a long flat screw driver to push the small clip in the middle then at the same time push up.
  • one you took off all 3 you can pull it out .(CAREFULLY)
  • TWIST OFF THE SMALL BLK ONES OFF VERY EASY YOU CAN BUY AT ANY AUTO STORE . BUT FOR THE ONE THAT LIGHT UP WHEN YOU CHANGE GEARS IF YOU AUTOMATIC YOU WILL HAVE TO GET THEM FORM THE HONDA DEALERSHIP FOR THE WHT ONES I STILL don't know how to take them off . am going to see if honda can give me a hand .
  • just to let you now am also changing the clock light and the Cruise control/TCS button light also
  • O I for got change all the lights in the dashboard cause it is a b***h to take it off.
  • hopefully this helps

Posted on Jan 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi carisma not working fine to the extent that it cannot climb a little hill until we push it...i changed the plugs,nozzles and fuel pump,yet still the same thing


Fuel filter or catalytic converters. If the engine cuts out or has no power. Could be the compression for the pistons. I would check compression first. You could have transmission problems also. 1 Compression good, 2 change the fuel filter, they never get changed. 3 Pull the pre O2 sensor/s. Still no change, Look at the transmission. Have the codes read first.

Jun 26, 2016 | Mitsubishi Cars & Trucks

1 Answer

How can I fix my dashboard clock in my 2003 Mitsubishi Eclipse GS?


Press and HOLD the Minutes or Hours button and clock will set...
saailer

May 08, 2014 | 2001 Mitsubishi Eclipse

1 Answer

How do you change bulb on clock/radio display on Mitsubishi Galant 2004?


If your clock is in the screen you don't need to change a bulb there are no bulbs in there, why year and make and model is the car??

Apr 13, 2013 | Cars & Trucks

1 Answer

How to change light in clock on 2002 honda accord


The clock slides out by carefully prying with a fine screw driver. Take care not to scratch the dashboard fascia. It has a mini light bulb in the back, which can be taken out by rotating it with a small scredriver. it looks like a small plastic disc with ridges on it. Take it to the dealer / parts shop so they can see the proper color. Accord dashboards came with 3 different color plastic covers on the bulbs, in order to match the rest of the dashboard and radio. No need to disconnect the 2 electrical plugs that attach to the clock.

Oct 15, 2010 | 2002 Honda Accord

2 Answers

Mitsubishi Carisma P reg 1997. How do you replace the


some noise in accelerating but normal in idle of my mitsubishi 4m40please help me so

Sep 30, 2009 | 1997 Mitsubishi Galant

1 Answer

Hi There, I need to change my fuel filter on a mitsubishi carisma 1.8 gdi petrol 2000 (W), does anyone have any idea where I should be looking??


It is under the hood, on the driver's side, rear engine area, driver's side of the master cylinder, mounted in between the fuel line.

Aug 29, 2009 | 2000 Mitsubishi Mirage

2 Answers

Programming Key Fob


I have just bought a Shogun Sport Equippe TD, I have not taken delivery yet but I do own a Carisma and the way you program that remote key is to turn on the ignition for 10 sec +'s then switch off and press the close button, this causes the door locks to respond.

Jan 02, 2009 | 2002 Mitsubishi Montero Sport

1 Answer

Clock inside car, mitsibishi carisma, works but the backlight doesnt work. hence cannot see clock in dark


The panel around the clock is held in place by 4 clips .
All we have to do is prise it out using a wide thin steel lever.
Dont use a screwdriver unless you want to damage the dashboard.
It comes out directly towards the rear of the car.
You can then get to the bulb on the back without taking off the
wire to the heater , There is Just enough space to do this.
you need a small screwdriver to take the bulb holder out.

the clips are located - top and bottom, left and right or one on each side?

Oct 20, 2008 | Mitsubishi Colt Cars & Trucks

1 Answer

Carisma 1.8gdi will not rev past 4000 revs and show


im having the same problem changed maf changed coils cleaned the carb but still stays at 4000 rpm help please

Aug 09, 2008 | Mitsubishi Eclipse Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...