Question about 2000 Mazda Protege

1 Answer

Indicator lights no longer blink its one solid light

On my way to work one day, I turned on my indicator to turn, while awaiting to turn it stop blinking and stayed as one solid light. This is so with all lighting funtions now, right left and hazard. What do I do for this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

Im Not Totaly Sure But Most other Makes & Modles Ues 2 Seperate Signal FLASHER Units
Your Owners Manual Should Show this As Turn Signal "FLASHER" Located At or Near Fuse / Relay Box This is ASUMING you have Checked The Fuses and Relays

Posted on Feb 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alpha Romeo 156 My Left hand indicator light stays on continually, does not flash. and when I turn the hazard light switch on both indicators continually glow.


Generally speaking, symptoms of a bad or failing turn signal bulb are usually the culprit...in your case, either it's the front left or rear bulb. Varies for different vehicle makes...common signs include:
  1. turn signal light staying on solid
  2. or blinking very fast
  3. or either sides of the bulbs stop blinking altogether.
To test this, make sure you reconnect everything you disconnected.
Turn the left signal light on; go to the front of the vehicle, is the turn signal bulb illuminated? If it lights up, even though it is not blinking obviously the bulb is okay. If it doesn't, replace it- problem solved. You'll do the same procedure for the rear turn signal Is that lit up? If not replace the bulb and the problem is solved.
Another common failure is when the turn signal blinks really fast, same procedure as mentioned above.
If both bulbs for the left side and right side illuminate but don't blink, the problem is in the steering column turn signal switch.
If the left or right side blinkers don't work properly at all...then check the integrated hazard warning/turn signal flasher relay- that may be defective; again, that's usually the case if both sides of the signal light don't work.
If you are blowing any fuses related to the flasher system, you have an electrical overload in the turn signal circuitry.

Feb 12, 2017 | Cars & Trucks

1 Answer

Signal lights have power and work will not blink when indicator is on light stays solid and hazards light do same.


that is usually an indication of a burnt out bulb in the turn signal/hazard lights. the other possibility may be a bad flasher. Check all the running, blinker and hazard lights by turning them on one at a time and walk around the car looking for burnt out lights.

Aug 17, 2010 | Toyota Camry Cars & Trucks

1 Answer

The sideview mirror lights and windows have


I am pretty sure it is the body control module. My 02 sable is currently having a similar issue. On a random day my girlfriend took the car to the store, the car started honking when she went to re-enter the vehicle. never done that before. Later that night the left front turn signal will not shut off. the turn signal light on the dash stays on solid, this morning the bright light indicator was on solid and the turn signals worked perfectly fine until the blinker light eventually went back to on all the time. I disconnect the battery at night or if I am not going to drive it for a few hours. But I am 99% certain it is the BCM causing this.

Feb 18, 2010 | 2002 Mercury Sable

2 Answers

My left indicator does not blink, it stays solid


I would start by checking the blinker light bulb on the left side front and or rear,some vehicles will blink real fast and some wont blink at all when a bulb goes bad.

Nov 24, 2009 | 2000 Volkswagen Golf

1 Answer

1997 toyota conquest 1.8. Turn indicators are scrambled.


Have a look at your relay and fuses. But you may not apply DIY method because this needs an expert hands-on. Needs to trace where the wires were wrongly connected.

Rate this please.

Apr 04, 2009 | 2006 Toyota Corolla

1 Answer

The headlights will not go on


What you have is a ground problem. Check the body ground off the battery. There might be a small wire coming off the negative battery terminal, that is also a body ground.

Mar 06, 2009 | 1996 Jeep Cherokee

1 Answer

Indicator Lights and Stop lights no longer work


check the multi function switch on the collumn. this is the blinker switch. all lights are routed through this switch.

Feb 02, 2009 | 1992 Hyundai Excel

1 Answer

Diagnostic light blinking 17 times means what ?


i had the same problem, it should be the speed sensor on your transmisson after a while your speedometer will stop working. no clue on the lamp...

Dec 29, 2008 | 1989 Honda Prelude

1 Answer

Turn signals 2003 Ford F-150


Sounds like the turn blinker is shorted internally. Suggest you change it out, to test this.

My next check is that no wiring is melted and burned, such as can happen with any connection to tow a trailer. U-Haul has fine print that indemnify them of any problems they cause! have you towed anything recently?


Dec 25, 2008 | 2005 Ford F-150

1 Answer

Turn signal


Now replace the flasher unit! Frankster016

Oct 25, 2008 | 2002 Nissan Xterra

Not finding what you are looking for?
2000 Mazda Protege Logo

616 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

69244 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...