Question about 2004 Acura TL

1 Answer

Right headlamp doesn't work on low beam only

1996 Acura TL. The low beam went out, high beam works fine. I replaced the right headlamp bulb and same problem, high beam works fine, low beam does not. Fuses are OK (there are one for each side).

Posted by on

  • 2 more comments 
  • raj3438 Mar 18, 2012

    i have same problem did you find out solution. i have acura 1.7 el

  • Anonymous Mar 14, 2014

    low beams work,high beams does not

  • Anonymous Mar 16, 2014

    Hi im having problems with my 2000 gmc sierra 1500 all of a sudden my high and low beams came on on my right side whem swith is on low and low on left side went off and high on tight side is dim and when put on high beam they work fine i have not modid it so highs stay on with lows any ideas?

  • Anonymous Mar 19, 2014

    Can u reply quickly plz

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 104 Answers

In this case make sure you have voltage going to the low beam lights. 12 volts. you need a volt meter. if you do not have volatge you have to check and make sure power is going through the fuse. a bad fuse will be broke, but you can have a good fuse with no power going through it. if you have power going through the fuse you have a wiring open somewhere between fuse and whatever is between the headlight connecter.

plz check and get back i will keep checking on here on and off.

Michael
ASE certified
PLZ rate

Posted on Feb 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlamps not working.


is the light setup one ballast for high and low beam ? if so the ballast has gone, probably even the bulbs. replace the ballast and bulbs. some aftermarket ballasts don't last, if you cannot find the right ballast for replacement you will need to replace both ballasts. as every ballast set are set the same and sold in pairs.

Jun 01, 2017 | 2001 Oldsmobile Silhouette

2 Answers

2007 yukon headlight wont turn on


Odds are you have a connection problem. Stop & buy a tube of dielectric compound from an auto parts store. Apply it to the electrical connection at the lamp after you make sure there is no corrosion present.

Feb 04, 2018 | 2007 GMC Yukon

1 Answer

Both headlights went out same time . bulbs are good . fuses are good. back lights work and high beam works too. what else can it be? and is this common with these cars . 1998 acura 2.5 tl year is 1998 not...


Test the leads to the bulbs while the low beams are on and then when the brights are on. If you have good bulbs & fuses with no power on low, the problem is most likely the bright/dim switch.
Not exactly sure of the Acura layout, but the covers over the steering shaft should remove with several screws to allow access to the switch (usually the turn signals are also the bright/dim switch) Test the leads out to the headlights from the bright/dim switch, that will tell you if the switch is bad.
Airbags are closely involved with this removal/replacement, it is NOT recommended for a amatuer to undertake.

Dec 17, 2009 | 1998 Acura TL

1 Answer

96 ford explorer headlamp quit working on low beam


check for power at the bulb socket also check for poor contacts in the socket

Aug 18, 2009 | 1996 Ford Explorer

1 Answer

Replace headlamp acura tl 2000 3.2


If you do not have a sealed beam assembly, then remove the four screws on top...when the headlight assembly comes out unclip the harness from the bulb assembly. Pull the bulb out and replace...don't touch the halogen bulb with your fingers...just the plastic base.

Mar 29, 2009 | 2000 Acura TL

1 Answer

My headlights dont work,.all other lights are fine though,.is it the fuses or the bulbs? im not sure what fuses they would be,.there seem to be different ones for the same thing


do your flash to pass lamps light when you pull the stalk towards you? If yes, the bulbs are ok.
Do the hig beams work?
Your headlamps have sepaerate fuses for each headlamp and you have a low beam relay and a high beam relay under the hood in the black box.
If everything is out, I suspect a bad headlamp switch.
Check car-part.com and look on page with * for cheapest price.

Your owner manual will identify fuses & relays.

PS, You did not recently instal high current bulbs did you? If yes, put originals back in.

HEADLAMPS

The voltage is supplied to the lamp switch through a fuse. This fuse is located in the central junction box in the left-hand footwell.
When the headlamps are switched on, a voltage is supplied to the high beam/low beam switch and to the low beam relay. The relay for the low beam is located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "low beam", then a voltage is supplied through the low beam relay to the low beam part of the headlamp assembly. The left and right-hand low beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "high beam", then a voltage is supplied through the high beam relay to the high beam part of the headlamp assembly. The left and right-hand high beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.

----------------------------------------------------------------------------------------------------------
Lamp Switch
Removal
  1. s2y~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
    Remove the lower driver's side footwell trim.
  1. Detach the lamp switch bezel.
    • Remove two screws.
  1. Remove the light switch.
    • Remove three screws.
    • Disconnect the electrical connector

Feb 23, 2009 | 2005 Ford Focus

2 Answers

Low Bean Lights Inoperative on 1997 Acura TL


If your car is running daytime running light system .. there is a DTR relay that goes defective and needs replacing ... I had the identical problem that was fixed with this replacement. The DTR relay is behind the glovebox.

Feb 04, 2009 | 1997 Acura TL Series

1 Answer

2002 acura tl headlight issue


MAKE SHURE YOUR GROUNDED AND THE BULB IS IN RIGHT SOME BULBS YOU CAN NOT TOUCH WITH YOUR FINGERS BECAUSE OF MISTURE ON SKIN

Oct 11, 2008 | 2004 Acura TL

Not finding what you are looking for?
2004 Acura TL Logo

787 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...