Question about 2006 Chrysler Town & Country

Open Question

2006 chrysler town & country passenger sliding door off track

The sliding door on the passenger side came off of the wheel track when my son opened it manually. I fully opened the door in an attempt to re-engage the roller wheels on the track but it does not want to go back in place. Am I missing a step? Has anyone had this problem? Any suggestions?

Posted by on

  • bujji230 Apr 11, 2009

    I have the exact same problem. My daughter opened the sliding door manually and now it is off track. I am not able to get it back on track. I would appreciate any assistance with it.

×

5 Suggested Answers

SOURCE: can't remove the wheel from a 2006 town and country

aluminum wheel, steel hub. corrosion creates a sticky situation. Try a large blow to the side wall of the tire, carefully as the blunt object used will most certainly bounce back! A couple of blows to the front then rear of the sidewall (while looking at tire from side) should brake it free, when replacing, use anti-sieze on the hub where alum and steel meet.

Posted on Oct 02, 2008

emissionwiz
  • 64034 Answers

SOURCE: i have a problem with power sliding doors on 2001 Chrysler Town and Country limited

do you mean they are sticking?

Posted on Oct 20, 2008

godspeed808
  • 125 Answers

SOURCE: My 2001 Chrysler Town & Country passenger sliding door won't open

your door panel can come off and you can access internal door locking mechanism from inside car first inspect to see all rods are hooked into plastic sleeves then make sure lock is disengaged by pulling rod towards rear of van it should then be able to be opened easily if not your locking mechanism is frozen inside of door between a pillar and door it will have to be pushed to open from inside of door panel once you do that door will open if you cant make lock work manually once this is done replace locking mechanism or rods accordingly.

Posted on Feb 04, 2009

motor1258
  • 6674 Answers

SOURCE: Power door lock inoperable on passenger sliding door only

Not sure if they are same on 2006 but there should be a couple of small rounded metal contacts, or similar, on door that meet with door post to complete the connection. When you find them, clean them off with a little fine steel wool or SOS pad, minus the soap, and see if that doesn't cure it.

Posted on May 18, 2009

  • 5 Answers

SOURCE: power sliding door will not activate

oh we have a 02 C T & C and our keyless entry for the sliding doors. when the side doors are not closed all the way or opened all the way the keyless entry won't kick in. try doing it closed or fully open, if this does not work try checking the battery in the remote. over all lets put it this way the 02 C T & C is like the best mini van around however it comes with alot of problems from ac. to tail lights

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 TOWN AND COUNTRY DRIVERS SIDE SLIDING DOOR STICKS


There is a tsb out for problem with power sliding doors check with you dealer.
Tsb technical service bulliten a message for dealers. Tsb #2302007 POWER SLIDING DOOR adjustment

Jun 10, 2014 | 2006 Chrysler Town & Country

1 Answer

Passenger door lock does not lock or unlock. It is moving just a little but not enough to lock or unlock the sliding door. The rods are not being restricted in any way. 2006 t&c, dual sliding side...


If it´s the passenger side where the gas tank fill is, there is a automatic safety device that locks the sliding door, that prevents to open the door while filling gas, be sure that the folding cover of the gas tank is fully closed and nothing is jammed inside

Aug 13, 2010 | 2006 Chrysler Town & Country

1 Answer

Looking to replace passenger side mirror on a 2006 Town and Country. Anyone have Instructions available?


    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

Jun 01, 2010 | 2006 Chrysler Town & Country

1 Answer

2005 chrysler town and country passenger power door


The cog belt could be missing teeth or have debris in the cogs...

Feb 15, 2010 | 2005 Chrysler Town & Country

1 Answer

On my 2006 Chrysler Town & Country Touring, the driver side passenger door still opens and shuts with the button, but stops at a certain point and won't closer or open completely. Like sometime is...


Yes, most likely the door tracks need to be cleaned and lubricated as grit and other road debris has clogged up the tracks. Use a vacuum cleaner and a can of WD-40 lubricant [available at walmart, kmart, and any auto parts store] to get your door working smoothly again.
thanks for choosing fixya! Regards, Joe

Nov 13, 2009 | 2006 Chrysler Town & Country

1 Answer

The side automatic sliding door is not working correctly


I had a same problem with my windstar. I found the kids somehow slipped a toy down in the track and it was jamming from this. Oh these kids sometimes. Check your door track throughly to see what is in the track. The track runs on the top as well as below the floor. Hope this helps you.

Oct 17, 2009 | 2002 Chrysler Town & Country

2 Answers

Power door lock inoperable on passenger sliding door only


Not sure if they are same on 2006 but there should be a couple of small rounded metal contacts, or similar, on door that meet with door post to complete the connection. When you find them, clean them off with a little fine steel wool or SOS pad, minus the soap, and see if that doesn't cure it.

May 18, 2009 | 2006 Chrysler Town & Country

1 Answer

Driver's side power window doesn't work


2006 chrysler town and country passenger side window suddenly stopped working.
other windows work, sliding doors work as does rear hatchback.
fuses seem to be good.
might there be a safety switch that somehow got pushed that keeps the passenger window from opening?

Mar 12, 2009 | 2006 Chrysler Town & Country

1 Answer

2006 chysler town and country


There should be a manual shut off switch for the doors. shut off the power to the doors then manual open it. you should be able to overcome any debris in the track. then you can clean it out. it the door is locked and won't unlock, the fuel door may be open or cracked open enough to not allow the door to unlock. there is a lever or switch that prevents the door from opening when the fuel door is open.

Jul 20, 2008 | 2006 Chrysler Town & Country

Not finding what you are looking for?
2006 Chrysler Town & Country Logo

Related Topics:

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...