Question about 1999 Cadillac Eldorado

1 Answer

Instrument Panel Cluster stopped working

I have a 2001 Cadillac Eldorado and my instrument cluster stopped working and I cant seem to find a fuse for it. Any know how to fix this?

Posted by on

  • Anonymous Mar 12, 2009

    that sucks
    i was hoping it would be easy n chep

  • Anonymous Mar 24, 2014

    instrument cluster light goes in and out

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cadillac Master
  • 61,168 Answers

U ARE GOING TO HAVE TO PULL THE INSTRUMENT CLUSTER OUT AND SEND THE ENTIRE UNIT IN FOR REPAIR AT AN AUTHORIZED GM DIDGITAL DASH REPAIR CENTER, YOUR DEALER CAN SUPPLY THRE NAME AND PHOMNE NUMBER, THIS IS NOT A FUSE PROBLEM.

Posted on Feb 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

91 olds instrument cluster is dead


Check fuse panel blown cluster panel fuse, other than that make shure cluster is getting good ground. Replacement cluster would not be expensive from auto wreckers.

Jan 15, 2016 | Cars & Trucks

1 Answer

What could cause the instrument cluster to stop working?


you might go to dealer did you unhook the battery try unhooking it rehooking it up it up after20 seconds i look for relay instrument panel in engine compartment replace it

Sep 04, 2014 | 2001 BMW 325i

1 Answer

I replaced the instrument cluster & head light switch on my 2001 buick century and the instrument panel and tail lights still do not work, what else can I do


Check 20Amp LP Park Fuse in Underhood Fuse Block (mounted to right strut tower) Check 15Amp Tail Lic. Lamp Fuse In IP Fuse Block.

Mar 15, 2014 | Buick Cars & Trucks

1 Answer

Insturmentation panel lights fuse blows when i start car


Try to remove the instrument panel and disconnect the harness to see if doing that gets rid of the blown fuse when starting the car. If it does, then the instrument panel should be replaced with another. If the fuse still blows when starting, then there is a wire shorted to ground somewhere.
---
Instruments and Switches Instrument Cluster Removal & Installation To Remove:
  1. Remove the instrument cluster trim plate.
  2. Remove the instrument cluster mounting screws.
  3. Rotate the instrument cluster rearward and lift up on the top of the cluster in order to disengage the locating pins.
  4. Disconnect the electrical connectors from the instrument cluster.
  5. Remove the instrument cluster.
To Install:
  1. Connect the electrical connectors to the instrument cluster.
  2. Position the locating pins to the holes in the instrument panel.
  3. Install the instrument cluster by rotating the top inward.
  4. Install the mounting screws.
  5. Install the trim plate.
prev.gif next.gif

Nov 09, 2010 | 2001 Pontiac Grand Am SE

1 Answer

How to read codes for 2001 Eldorado Cadillac


Take a look at your air con controls on the centre console.

You will see an "OFF" button and to the right of this you will see a toggle switch with an up arrow with the word "PASS" just below it.

Simultaneously press the "OFF" button and the up arrow together for three seconds or so and release when you see the instrument cluster lights come on.
You are now in diagnostic mode.
Read the codes from the digital display on the instrument cluster.
Have a pen and note pad ready to write down the codes.



May 18, 2010 | 2001 Cadillac Eldorado

1 Answer

Instrument panel lighting has stopped working.


Fuse on back of gage cluster, and the dimmer switch on the gage cluster.

Apr 24, 2010 | 1993 Mercedes-Benz 190

1 Answer

1997 cadillac eldorado instrument cluster removal


remove ac vents with flat head screwdriver . thair should be a 7mm bolt in each vent holding tha dash pad on remove them. remove the trim going to head liner from the dash pad. use a 7mm to remove the bolts holding the cluser in place should be one each side and 3 across the back . disconnect the wiring harness and your done. also disconnect the negative batery cable when doing this

Feb 15, 2010 | 1997 Cadillac Eldorado

1 Answer

88 eldorado instrument panel is dead, including speedometer and fuel gauge. None of the digital instrument panel gauges are lit up. How can I troubleshoot this problem? TJ


It sounds like the problem is your dash cluster itself. you should be able to find another dash cluster for an 88 DeVille in almost any junk yard.

Feb 04, 2010 | 1999 Cadillac DeVille

2 Answers

Speedometer/odometer stopped working today (panel not displaying any data). where do i start?


Always start with the easy stuff first on electrical- fuse panel first.

Sep 04, 2009 | 1998 Cadillac DeVille

1 Answer

I need to remove the cover on the gauges on a 2001


Instrument Cluster Removal and Installation Disconnect the battery ground cable. For additional information, refer to Section 414-01 . Remove the instrument panel center finish panel. Remove the screws. Disconnect the connectors and remove the instrument panel center finish panel. Remove the hood latch release handle. Remove the screws. Lower the hood latch release handle out of the way. Remove the instrument panel steering column cover. Remove the screws. Remove the instrument panel steering column cover. Remove the instrument panel steering column opening cover reinforcement. Remove the four screws. Remove the instrument panel steering column opening cover reinforcement. Position the column gearshift lever in the low position. Partially remove the instrument cluster finish panel. Remove the screws. Position instrument the cluster finish panel to gain access to electrical connectors. Remove instrument the cluster finish panel. Disconnect the connectors. Remove instrument the cluster finish panel. NOTE: Illustration shows steering column removed for clarity. Remove the instrument cluster. Remove the screws. Remove the transmission range indicator and position the cluster forward to disconnect the three electrical connectors on the back. Remove the instrument cluster.

May 15, 2009 | 2001 Ford Explorer Sport

Not finding what you are looking for?
1999 Cadillac Eldorado Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...