Question about 1996 Chevrolet Monte Carlo

1 Answer

Rear brake lights don't work

Rear window brake light works,all other tail and marker lights working.power to everything.are there 2 brake switches?one for the window light and ne for the rear tail lights?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

There is only one brake light switch. There should be a wiring harness connector somwhere in the back of the car. Follow the wires from the tail lights until you get to this connector. Take it apart and clean the terminals and reassembl. If this does not do it, move further up the harness until you next connector, do the same thing.

Good luck

Posted on Feb 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello i have a toyota camry 1992 and my passenger side marker wont turn off ???


That's very odd, because the wiring for all of the side markers are just splices from the nearest park lamp wires- the rear tail light in the rear (and the license plate lamps are also splices from these tail lights), and in the front side markers, they are splices from the nearest park lamps. Do all the other park lights work and turn on with the park light switch on? I would examine the 2 wires from that side marker's socket to the wiring harness it goes into-the power wire would somewhere splice into the passenger tail light wire. The other wire would be a ground wire and also splices into a ground wire for the rear end. To be on, the marker lamp would have to be getting power from some live source. I can't imagine where. Does the rear passenger light work correctly?

In that harness to the rear where the park lamps run, there might be a live wire going to an electrical trunk latch switch, or maybe a trunk lamp. If the wires were frayed right beside the side marker wire, you could have some cross feeding of power between the two. Let me know, we always appreciate feedback.

Sep 06, 2015 | Toyota Cars & Trucks

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

Can not get my tail lights to work onk 1989 gmc truc


The front park lights work correct? If the front park lights work than there is not a problem with the light switch since the brown wire from the switch supplies power to the front park lights, front side markers, and the rear taillights. There should be twelve volts on the brown wire from the headlight switch with the connector plugged in and the park lights turned on. If this is true that there is a problem with the wiring to the back of the vehicle. A thorough inspection of the harness should reveal the problem. The dim break and blinkers support the above. High resistance also know as corrosion, in the wires or connections would cause this problem.

Aug 24, 2012 | 1989 GMC Sierra

2 Answers

Subaru outback wagon tail light not working off


There are several components of your 1997 Subaru Outback that can cause your tail lights to stop functioning correctly. To help pinpoint the cause of the problem, it would be very helpful to also check your front marker lights. If the marker lights are working, then we know that the problem is not the headlamp switch or the tail and illumination relay (located in the fuse and relay box).

The components to check are:

> Fuse #23 (20 Amp) in the Main Fuse Box.
> Fuse #5 (10 Amp) in the Fuse and Relay Box
> Tail And Illumination Relay
> Headlamp Switch

May 06, 2012 | 1997 Subaru Outback

1 Answer

Tail lights not working. fuses look good, brake lights work, hazards work, but running lights don't- gmc sierra 2500


do the front marker/park lights work if not you could have a bad light switch on the tail light side of the switch.you need to check the brown wire at the back of the truck in the wiring harness as this is the tail light wire that feeds the bulbs.if you have power there then you will have to check for power at the socket,if no power at the socket but were you check the wire then there is a problem between the two that you will have to check out.if there is no power when checking the wire then you will have to check for lose of power between the switch and rear wiring.make sure the fuse is good by using a test light and not by looking as sometimes they look good but don`t work.

Jul 11, 2011 | GMC Sierra 2500 Cars & Trucks

1 Answer

Marker lights do not work. 1994 nissan pickup SE


I would start by checking all the fuses, then check the headlight switch,test it for power as you did the tail light, then check the wiring coming out of the cab down the frame to the rear of bed check for a short but if all fuses are good then will not be a short, may be a bad switch and the most important is the bulbs, make sure they are good.

Jul 05, 2010 | 1994 Nissan Pickup

2 Answers

Fuel Pump Fuse Number for a 1998 audi a4 2.8 quattro


Fuses: Fuse arrangement in fuse panel, behind instrument cluster, left
Fuse Arrangement In Fuse Panel 62624464

1 - Heated washer jets 5A 2 - Turn signals 10A 3 - Headlight washer (relay), illumination for glove
compartment, climate control, Automatic Transmission, instrument cluster 5A 4 - License plate light 5A 5 - Instrument cluster, seat heating, test connection
for cruise control, bulb monitor for auto-check display, Automatic Transmission display, switch
lighting, mirror switches and actuators, airbag
warning light, outside temperature indicator,
climate control 10A 6 - Central locking system 5A 7 - Anti-lock brake system (ABS) 10A 8 - Vacant 9 - Mirror heating 10A 10 - Vacant 11 - Cruise control (Automatic Transmission) 5A 12 - On board diagnostic system 10A 13 - Brake lights 10A 14 - Interior lights, reading lights, anti-theft alarm system, vanity mirror 10A 15 - Instrument cluster, power windows, climate control, automatic transmission 10A 16 - Anti-lock brake system (ABS), Anti-Slip Regulation (ASR) 5A 17 - Heated door locks 10A 18 - High-beam, right 10A 19 - High-beam, left 10A 20 - Low-beam, right 15A 21 - Low-beam, left 15A 22 - Side marker and tail light, right 5A 23 - Side marker and tail light, left 5A 24 - Wiper and washer system 25A 25 - Blower for heating, climate control 30A 26 - Rear window defogger, mirror heating 30A 27 - Rear window wiper 15A 28 - Fuel Pump 15A 29 - Engine timing 30A 30 - Sun roof 20A 31 - Tail lights, cruise control, automatic transmission 15A 32 - Engine timing 20A 33 - Cigarette lighter 15A 34 - Engine timing 15A 35 - Trailer recptacle 30A 36 - Fog lights 15A 37 - Radio 20A 38 - Luggage compartment light, central locking system 15A 39 - Emergency flasher system 15A 40 - Horn 25A 41 - Anti-lock brake system (ABS) 25A 42 - Vacant 43 - Vacant

Apr 05, 2010 | 1998 Audi A4

Not finding what you are looking for?
1996 Chevrolet Monte Carlo Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...