Question about 1999 Volvo S80

2 Answers

Automatic Transmission Rough Shifting

When transmission is at temperature (hot) from a stop, when I accelerate first-second gear seem fine but third gear the engine rpms rise and excelleration is very slow. This problem only happens when it has been driven. I also have a tapping soind coming from the valves, oil is o.k. do I need a tune up, can the valves be adjusted or are they self adjusting?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

From the sounds of it you need to have your transmission rebuilt, there is no quick fix for a fault in one gear. As far as the tapping noise goes quite often a oil change is all that is required to cure it.

Posted on Feb 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My gear is so hard to shift from 3rd to 4th gear

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1994 lesabre not shifting


Not a solution but a suggestion.. If you have a scanner hook it up and check for codes that way... it could be throtle positioning sensor

May 15, 2014 | 1994 Buick LeSabre

1 Answer

Suburban transmission shifting


Kickdown cable unhooked, attaches next to accelerator petal cable.

Apr 01, 2014 | 2003 Chevrolet Suburban 1500

1 Answer

2003 GMC Transmission Problem: 1- At cold start,


I suspect transmission oil drain back to oil pan during night.
if you want to confirm.
engine stop take oil level place a mark on dipstick then let it sit overnight. in the morning take oil level if it raise then oil have to charge the torque converter you hear a cavity front pump noise.
when hot take oil level engine hot in park have to be at top of oil level

Sep 26, 2013 | 2003 GMC Envoy

1 Answer

Bmw z3 automatic transmission shifting hard


sometime the gear inter mesh is not accurate.

Feb 20, 2013 | BMW Cars & Trucks

2 Answers

How do i add transmission fluid to my 1997 isuzu trooper automatic transmission


have the fault codes read as it could be wiring or TCM problem
if you have a transmission dipstick , add oil via that tube

Mar 28, 2017 | 1997 Isuzu Trooper

1 Answer

How to find codes for check engine light on


Check Engine Light Codes and Meanings
Long blinks Short blinks Problem
1 1 Camshaft position sensor
1 2 Mass air flow sensor
1 3 Engine coolant temperature sensor
1 4 Speed sensor
1 11 EVAP control system (flow)
1 14 Fuel injection system right bank (too rich)
1 15 Fuel injection system right bank (too lean)
2 1 Ignition circuit
2 3 Closed throttle position switch
2 5 Idle speed control
2 9 Fuel Injection system left bank (too rich)
2 10 Fuel Injection system left bank (too lean)
3 1 ECU
3 2 Exhaust gas recirculation system flow problem
3 3 Front left O2 sensor
3 4 Knock sensor
3 5 Exhaust gas recirculation temperature sensor
3 6 EGRC-BPT valve
3 7 Closed loop control
3 8 Closed loop control
4 1 Air intake temperature sensor
4 2 Fuel tank temperature sensor
4 3 Throttle position sensor
4 7 Crankshaft position sensor
5 3 Front right O2 sensor
5 4 Automatic transmission control unit
6 3 Cylinder #6 misfire
6 4 Cylinder #5 misfire
6 5 Cylinder #4 misfire
6 6 Cylinder #3 misfire
6 7 Cylinder #2 misfire
6 8 Cylinder #1 misfire
7 1 Multiple cylinder misfire
7 2 Three way catalytic converter (right side)
7 3 Three way catalytic converter (left side)
7 4 Evaporative emission control system pressure sensor
7 5 Evaporative emission control system
7 7 Rear O2 sensor
8 1 Vacuum cut valve bypass valve
8 2 Crank position sensor
8 3 Absolute pressure sensor
8 4 Automatic transmission control unit
8 6 Evaporative emission canister purge control solenoid valve
8 7 Evaporative emission Canister purge control solenoid valve circuit
9 1 Front Right O2 sensor
9 3 Evaporative emission Canister vent control valve
9 5 Crankshaft position sensor
9 8 Engine coolant temperature sensor
10 1 Front left O2 sensor
10 3 Park and Neutral position switch
10 5 EGRC solenoid valve
10 8 Evaporative emission canister purge volume control valve
11 1 Inhibitor switch
11 2 Revolution sensor
11 3 Improper shifting to first gear (Automatic transmission)
11 4 Improper shifting to second gear (Automatic transmission)
11 5 Improper shifting to third gear (Automatic transmission)
11 6 Improper shifting to fourth gear (Automatic transmission)
11 7 Solenoid valve lock up function
12 1 Shift solenoid B (Automatic transmission)
12 3 Overrun clutch solenoid valve (Automatic transmission)
12 4 Torque converter clutch solenoid valve (Automatic transmission)
12 5 Line pressure solenoid valve (Automatic transmission)
12 6 Throttle position sensor (Automatic transmission)
12 7 Engine speed signal
12 8 Fluid temperature sensor
13 2 MAP/BARO Switch Solenoid Valve
13 5 Fuel pump control module
13 8 Cooling fan

Dec 12, 2011 | 1995 Nissan Maxima

1 Answer

Transmission Acting Up


you have a bad motor mount that makes the motor **** around during
shifting. fix fast because this could damage the transmission

Nov 30, 2008 | 1997 Volkswagen Jetta

1 Answer

Transmission problem


I will be trading in car or fix by dealer . NICO club more helpfull thanks anyway.

Sep 12, 2008 | 2004 Nissan Sentra

1 Answer

Hard shift and blinking overdrive


The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

Jul 16, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
1999 Volvo S80 Logo

1,194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

69014 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...