Question about 2003 Jeep Wrangler

1 Answer

Open door tone???

My 2003 Wrangler Sahara makes the same noise as the tone when you open the door with the keys in it, but it happens when I'm doing 35-40 mph! I tried taking out the fuse for the open door tone out, but it still makes the same noise. It doesn't happen until I drive for about a mile or so at 35-40 mph without slowing down, and I have nothing on (radio, 4wd, heat, a/c, fog lights, etc..) There is nothing illuminated on the dash board like check engine or anything like that. The only way to get it to stop is slowing down to 15mph or less. Any ideas what this could be?

Posted by on

  • Anonymous Feb 08, 2009

    The sound isn't being caused by an open door. I took out the fuse for the open door tone and interior lights and it still happens. I noticed too that right after I start the car the same tone occurs but stops after 4 beeps.

  • ilostallhope Feb 08, 2009

    The sound isn't being caused by an open door. I took out the fuse for the open door tone and interior lights and it still happens. I noticed too that right after I start the car the same tone occurs but stops after 4 beeps. (Sorry for double posting up there, I'm kinda new to this site)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,674 Answers

Are both doors closing tightly? Perhaps one is just loose enough for it to send signal that it's open. Even try sitting still with vehicle running and open one door at a time, and push lever of button that trips it, in with your thumb, to see if it stops. if you come across one that doesn't do it instantly, or it goes on /off with slightest movement, you probably found the culprit. Let's try the free/cheap/obvious things first.

Posted on Feb 08, 2009

  • Mike Butler
    Mike Butler Feb 10, 2009

    Sorry I guess I should have eliminated a few distractions when I was reading that , my apologies. Have you tried the obvious like disconnect seat belt etc under seat just to see if that may be the problem area?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a blend door clicking noise. happens every time I open the door


topic HVAC?
Hvac " blend door, "
that part is bad, stuck or parts fell off. or broke inside.
or the door is jammed some way, cause overload of this servo.

to discover facts like this, one has to look.
(vacuum sys. cable or motor drive, some cars all 3 or 2 of 3)
newer cars use motor drive only...
did you look at it first? (if a motor drive looking is useless)
many new cars this is a blend door motor.
with cheap plastic gears inside. (a black box with wires)
some need to be recalibrate , simple steps in the FSM.

FSM IS, oem factory service manual.....
read that. and its all there, every step....

did you scan it first. to see if there are DTC errors for HVAC?
https://www.techauthority.com/en-US/Pages/Home.aspx

Jun 08, 2015 | 2011 Jeep Wrangler Unlimited Sport

1 Answer

How do i disassemble center column shifting mech in 2008 jeep sahara


what transmission, mine is 6speed, manual stick.
https://www.techauthority.com/en-US/Pages/FacetSearchResults.aspx?make=Jeep&year=2008&model=WRANGLER+SAHARA+4X4&engine=3.8L+V6+%28SMPI%29&producttype=Service+Manuals&ptCatId=3083

here is the book on cd. get one?
i have mine.
turn to the page for YOUR transmission and read.
never post questions if you dont know the driven line options.
we just cant guess them.

Jul 09, 2014 | 2008 Jeep Wrangler Sahara

1 Answer

MY 2008 SAHARA ALARM WILL NOT STOP RANDOMLY GOING OFF (LONG CONSISTENT BEEP) ANY SOLUTIONS?


the dash display tells you why,
it will show door open
if car has evics option, it tells you what door.
but in all cases the scan tool connected, tells you what door fails.
buy one, rent one, or barrow one.
or get it scanned, .

May 23, 2014 | 1995 Jeep Wrangler

1 Answer

I have a 98 TJ 2.5, does anyone know if it has another numbers in the chassi? (except the three plates inside the car) tnanks


hi no there is only the ones on the inside the layout should be like this for your one


1 Country of Origin 1 = United States 2 Make J = Jeep 3 Vehicle Type 4 = MPV 4 Gross Vehicle Weight Rating E = 3001-4000 lbs.
F = 4001-5000 lbs. 5 Vehicle Line Y = Wrangler 4×4 6 Series 1 = Sport
2 = SE
4 = Sahara 7 Body Style 9 = Open body 8 Engine P = 2.5L Unleaded Gasoline
S = 4.0L Unleaded Gasoline 9 Check Digit 0 through 9, or X 10 Model Year W = 1998 11 Assembly Plant P = Toledo #2 12-17 Vehicle Build Sequence Six Digit Number

incase the picture did not come out

1 Country of Origin 1 = United States
2 Make J = Jeep
3 Vehicle Type 4 = MPV
4 Gross Vehicle Weight Rating E = 3001-4000 lbs.
F = 4001-5000 lbs.
5 Vehicle Line Y = Wrangler 4×4
6 Series 1 = Sport
2 = SE
4 = Sahara
7 Body Style 9 = Open body
8 Engine P = 2.5L Unleaded Gasoline
S = 4.0L Unleaded Gasoline
9 Check Digit 0 through 9, or X
10 Model Year W = 1998
11 Assembly Plant P = Toledo #2
12-17 Vehicle Build Sequence Six Digit Number

hope this helps.

Nov 13, 2010 | 1997 Jeep Wrangler

1 Answer

2007 Sahara horn is faint sounding


sounds like you drowned the horn.......only answer is take it off and put it in a warm place(a hairdryer may work) to dry it out,if it dont then replacement only answer.(it is a sealed unit)

Apr 21, 2010 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

Rear passenger doors on vw polo 2003 not working. cant open doors


Mine is doing the exact same.

Have two solutions, will try it later today:

1. Unlock with remote tnen lock with key and then unlock with key.
2. Might be a power problem, check that batery is good.

Dec 08, 2009 | 1992 Volkswagen Fox

1 Answer

Manual transmission fluid leak. Where do I find the fill hole


check passenger side of transmission - it is a 3/8 ext that will fit the bolt - does not really look like a regular fill hole -

Aug 01, 2009 | 2003 Jeep Wrangler

1 Answer

First my drivers door wouldnt shut but i was able to lock it clos


I have a 2003 jeep sahara and experienced the same problem ..........with mine the lock mechanism was stiff and i had to remove the door panel and lube everything and work the locks and the release handles until they worked freely.
hope this helps!

Jan 09, 2009 | 1998 Jeep Wrangler

1 Answer

2007 jeep wrangler sahara with a mopar remote starter just beeps


That's not a remote starter on your key chain, it's a keyless entry for an alarm system.

Nov 17, 2008 | 2007 Jeep Wrangler Unlimited Rubicon 2...

Not finding what you are looking for?
2003 Jeep Wrangler Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...