- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Take that code and your car's registration to your local Ford dealer's parts department. They can look up the unlock code for you. You will need to input the code to unlock your radio. Write the code down in your owners manual, so that next time this happens [any time the battery is dead or disconnected] you will have to code to unlock the radio.
you'll have to find out the codes from the original owner of the receiver...or your gm dealer should be able to reset it or tell you how to...L8r. But by the time you pay a deal yo have just about spent the money to by one from wal mart or some place like that
IMPORTANT NOTE: You must have the security anti-theft code for yours radio from the car manufacturer! The sequence of programming is: 1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed. 2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt. 3. By the #1 key you will set up the first safe code digit. 4. By the #2 key you will set up the second safe code digit. 5. By the #3 key you will set up the third safe code digit. 6. By the #4 key you will set up the four-th safe code digit. 7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
press rds and fm1/2 together and hold it til your radio indicates the numbers 0000 then enter your code using the buttons 1234 keep presssing the number one til u get the first digit of your code then go on to the next number and so forth. once you get the code in press rds and fm1/2 again til lthe radio automatically turns on.
This solution is close, but not accurate for my 1998 A4 2.8. You press and hold FM2 and RDS until the display indicates 1000. Immediately release. Then enter code with radio numbers 1 through 4, pressing each one till you get the first no. of the code, then for 2, press till you get second no. of code, etc. The press and hold FM2 and RDS until radio comes on.
Press & Hold RDS & TP at the same time , display will flash enter your correct code then press and hold RDS & TP together to save the code. Radio will be unlocked after that if the correct code is entered
ensure the radio is off.press and hold preset 6 and switch radio on keeping 6 pressed.the display should change after a few seconds and u can then enter the pin code but i beleive u only get 2 or 3 attempts so make sure u have correct pin or it will need to be sent away to be unlocked