Question about 2004 Chrysler PT Cruiser
Where is the crankshaft position sensor located on a 2004 Chrysler PT Cruiser and how do I remove it? I've heard to try and locate it from the bottom of the car as well as from the top. I don't know. I've already replaced the camshaft sensor and the battery. The car died @ a red light and wouldn't start afterwards. It tries to turn over but won't start completely. There is no spark to fire it up..plugs/wires are good, ignition coil is working. Last option from what I've been told is the crankshaft position sensor but I cannot locate it. Thank you.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You may sneak it out with small fingers with out pulling out the starter.
If starter removal is required,Just unhook the battery cables,Remove the 2 bolts holding the starter on.
Please rate this a fixya
Posted on Feb 08, 2009
EXHAUST CAM WILL HAVE A NOCH ALIN AT 3 OCLOCK THE INTAKE ALIN AT 9 OCLOCK BOTH MARK ON THE CAM SPORKET MARK MEET EACH ANOTHER, THE CRANKSHAFT GEAR WILL HAVE A NOCH THERE WILL BE A MARK AT ABOUT 12 OCLOCK ALIN CRANK GEAR TO THAT MARK.
Posted on Nov 04, 2009
GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP
Posted on May 26, 2010
Tips for a great answer:
Aug 22, 2011 | 2005 Chrysler PT Cruiser
Mar 24, 2011 | 2004 Chrysler PT Cruiser
May 02, 2010 | 2003 Chrysler PT Cruiser
Mar 01, 2010 | 2004 Chrysler PT Cruiser
Sep 26, 2009 | 2004 Chrysler PT Cruiser
Jul 14, 2009 | 2004 Chrysler PT Cruiser
May 23, 2009 | 2004 Chrysler PT Cruiser
May 02, 2009 | Chrysler Pacifica Cars & Trucks
Aug 15, 2008 | 2004 Dodge SRT-4
18,280 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: