Question about 1998 Chevrolet Cavalier

1 Answer

Start problems chevy cavalier z-24 1898

My 1998 chevy cavalier z-24 wont start, we have replaced timing belt/ tune up/ gas is full / it will turn over but wont star, we have rfeplaced stater

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 323 Answers

You would need to check to make sure you have spark coming from the coil. Make sure you have fuel spraying from the fuel pressure valve. Make sure the distributor cap is not damaged and you have the correct timing set for the spark plugs, consult owners manual.

Posted on Feb 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 chevy cavalier where is the BCM (body control module) located?


You have no idea what your messing with . Theft light on , DTC'S - diagnostic trouble codes stored . Before you start replacing BCM an making matters worse ,do yourself a favor an take it to a qualified repair shop .
The powertrain control module (PCM) communicates with the instrument cluster using serial data over the UART serial data bus, CKT 800. When the instrument cluster determines a Pass Theft condition, the instrument cluster sends a coded password to the PCM. When the instrument cluster receives the correct password, the PCM enables the fuel injection system in order to allow the vehicle to operate normally. The PCM may allow the vehicle to start and stall quickly during a failed theft condition.

The Passlock™ lock cylinder is a locking cylinder that turns a rotating magnet past a stationary hall effect sensor. The rotating magnet creates a resistance code (R-Code) that the cylinder sends to the instrument cluster. The Passlock™ lock cylinder interfaces with the instrument cluster through a 3 wire connection. The 3 wires have the following functions:
• Power
• Ground
• Data
The THEFT SYSTEM indicator will not light under any circumstances.
Replace the instrument cluster.
For Chevrolet vehicles, refer to Instrument Cluster Replacement .
For Pontiac vehicles, refer to Instrument Cluster Replacement .
Multiple indicators light continuously.
Test for a loss of serial data. Refer to Data Link Communications System Check .
Instrument cluster DTC B1021 sets.
The DTC indicates a loss of powertrain control module (PCM) serial data. Refer to Data Link Communications System Check .
Instrument cluster DTC B1022 sets.
The DTC indicates a loss of SIR serial data. Refer to Data Link Communications System Check .
Instrument cluster DTC B1023 sets.
The DTC indicates a loss of ABS serial data. Refer to Data Link Communications System Check .
Instrument cluster DTC B1011 sets.
Refer to DTC B1011 Passlock Cyl Data Shorted This Ign Cycle in Instrument Panel, Gauges and Console.
Instrument cluster DTC B1012 sets.
Refer to DTC B1012 Passlock Bad R-code This Ignition Cycle in Instrument Panel, Gauges and Console.
Instrument cluster DTC B1013 sets.
Refer to DTC B1013 Passlock Bad Timing This Ignition Cycle in Instrument Panel, Gauges and Console.
Instrument cluster DTC B1014 sets.
Refer to DTC B1014 Passlock R-code Unprogrammed in Instrument Panel, Gauges and Console.
Instrument cluster DTC B1015 sets.
Refer to DTC B1015 Passlock Cluster Fail Enabled in Instrument Panel, Gauges and Console.
Instrument cluster DTC B1017 sets.
Refer to DTC B1017 Passlock R-code Learn Failed in Instrument Panel, Gauges and Console.
The indicator flashes and no instrument cluster codes are set.
Refer to DTC B1013 Passlock Bad Timing This Ignition Cycle in Instrument Panel, Gauges and Console.
So , do yourself a favor an have a qualified repair shop check it out .

Jul 22, 2016 | Cars & Trucks

1 Answer

I need a timing mark diagram for a 1998 chevy cavalier 2.2 engine


This engine doesn't have a belt it has a timing chain
Please follow this link to see another experts answer for the same question.

Jul 02, 2012 | 1998 Chevrolet Cavalier

1 Answer

I have a 1996 chevy cavalier z24 manual transmission. My car cranks but wont turn on. I changed the ignition Switch with a new key. The Anti theft alarm stays on. i cut the alarm off because the horn is...


Check timing belt. Remove the oil filler cap and look at the rocker arm. If you get someone to turn the engine while you watch and you see no movement... it's a broken belt. If you see movement, perhaps the belt has slipped. Replace belt and re time.

ash

Sep 24, 2010 | 1996 Chevrolet Cavalier

1 Answer

Diagram of Serpentine Belt 1998 Chevy Cavalier


diagram should be on the radiator shroud / top of radiator

Jan 10, 2010 | 1998 Chevrolet Cavalier

1 Answer

1998 chevie Cavalier steering hard to turn when it has to turn- does have steering fluid in it- is there a belt to replace or is it the steering mechanism?


possible pump or rack, be sure the belt is not slipping and that the tensioner is good.... a shop will need to check it, and recommend repairs.

Oct 14, 2009 | 1998 Chevrolet Cavalier

1 Answer

1998 chevy cavalier wont start


Sounds like you are getting power to everything but the engine.
Was there a ground wire to the head that you may have left off ?
Hope this helps
Sam

May 11, 2009 | 1998 Chevrolet Cavalier

1 Answer

1998 chevy cavalier z24 engine idels really bad


Have the o2 sensor checked this is quite possibly the problem.

Dec 11, 2008 | 1998 Chevrolet Cavalier

1 Answer

Chevy cavalier


try to replace the TPS or the IAC. It just might not be getting enough fuel or it is getting too much fuel.

Aug 20, 2008 | 1998 Chevrolet Cavalier

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...