Question about 1996 Nissan Maxima

2 Answers

Front door do not open

Hi good afternoon, my problem is when I try to open the doors with my remote it only opens the passengers door as the front side passenger and driver side do not open at all not even manually from inside of the car, please let me know how to fix it, thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Also if the linkage rods are find, than it's the lock selenoid that went out. If you want to save some money, visit a local yunk yard, try to go to a pick your part yunk yard ( the ones that you take your own tools) and take the part out yourself. The reason this is a good idea it's because you get to see how the part it's installed and when you install it in your car you have an idea how it goes.
good luck

Posted on Feb 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Check linkage rods inside of door. If some one has used a "slimJim" on thes doors they could have disconnected the linkages.

Posted on Feb 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Central locking 2005 subaru liberty stopped working on 2 doors


1. Replace battery in remote
2. Replace sensor at rhf door lock (it is inside of door)

Apr 30, 2014 | Cars & Trucks

1 Answer

Doors not opening even if they are unlocked


My 2009 Sebring does the same thing occasionally but only the drivers door gets stuck (dead locked - even though the locks appear to pop up).
The solution I have found once this happens is:
1) The car needs to be driven (crawl in thru the passenger door) -even just a short distance
2) Engine shut off & doors locked with remote (after you've exited from the passenger door of course)
3) Leave turned off for 10 minutes
4) Doors will now open when unlocked with the remote

Mar 14, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

Keyless remote will not open doors


Volkswagen Uses Vaccuum Door Lock Systems. Either a vaccuum line has been damaged or the Motor has gone bad. This is a common problem historically with all Volkswagens. Sorry no good news. If you are still under factory warranty then take it to the dealer and have them swap the parts. If not here is a good DIY link from Passatworld.com. Good Luck

Feb 29, 2012 | 2007 Volkswagen Passat 1.9

1 Answer

Remote control door locks drivers side works but passenger side doesnt open from outside


hi i assuming that it opens from inside if yes
the problem is the linkage or door lock actuator
to see witch one is the problem from inside the cor
press the door lock switch not the remote.if you hear nose
from passenger door put no movement in the lock that means
actuator is working and the problem is in the linkage
now you must tack door panel off to fix by reconnecting linkage
arm to actuator that should be your solution
good lock

Jun 26, 2011 | 2001 Jaguar S-Type

1 Answer

The passenger side, front door won't open with the key, remote, buttons inside nor can you force the lock open inside. What should I do


sounds like u have a froze up door lok motor.thats wat they do wen they freeze up/lock up..u need to remove door panel an manually force the lok lever to free it up, in order to open door an replace lok motor. good luck

May 01, 2011 | 2000 Buick Century

1 Answer

Passenger door and liftgate do not open with remote control or door panel control both start at the same time nissan murano 2005 s model


Liftgate is connected to front RH's door actuator thru back door's "opener switch". Replacing the passenger's door lock actuator will solve the problem.

Jul 25, 2010 | 2007 Nissan Murano SE

1 Answer

Rear passenger doors on vw polo 2003 not working. cant open doors


Mine is doing the exact same.

Have two solutions, will try it later today:

1. Unlock with remote tnen lock with key and then unlock with key.
2. Might be a power problem, check that batery is good.

Dec 08, 2009 | 1992 Volkswagen Fox

1 Answer

All doors open and close with remote except the passenger side ?


Sounds like the most likely cause is the electronic lock actuator is bad. will have to take door panel appart to check.

Jan 09, 2009 | 2000 Toyota Camry

Not finding what you are looking for?
1996 Nissan Maxima Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...