Question about 1999 Dodge Durango

1 Answer

Crank sensor can not find where the crank sensor is

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

CRANKSHAFT POSITION SENSOR - 3.9 - 5.2 - 5.9L ENGINES
REMOVAL

The sensor is bolted to the top of the cylinder block near the rear of right cylinder head

Note: The sensor is accessed by removing the right front fender liner

Remove right front tire and right front wheelhouse liner.
Disconnect crankshaft position sensor pigtail harness from main wiring harness.
Remove two sensor (recessed hex head) mounting bolts on the Crankshaft Position Sensor
Remove sensor from engine.

INSTALLATION
Position crankshaft position sensor to engine.
Install mounting bolts and tighten to 8 N·m (70 in. lbs.) torque.
Connect main harness electrical connector to sensor.
Install right front tire and right front wheelhouse liner.

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is crank shaft sensor location on 95 lexus sc300 please help


images for Where is crankshaft sensor location on 95 ...

eplaced engine on '97 SC300 now new engine does not have Crank ...

www.clublexus.com/.../633233-replaced-engine-on-97-sc300-now-new-...
May 4, 2012 - Location: arizona. Posts: 3 ... apparently 95-97s had an additional crank sensor. .... 1995 Lexus SC300 5spd Na-T ( TT Ecu Mod + a few others) 2jzge position sensor??
Nov 2, 2011
SC400 Crank Shaft Position Sensor. WHERE?????
Oct 11, 2011
SC300 No Spark
Oct 2, 2010
What happens if the Camshaft Position Sensor goes bad?
Jun 18, 2009
More results from www.clublexus.com

Lexus Crank Position Sensor ' LS400 SC300 ES300 GS300 ...

www.partsgeek.com > Crank Position Sensor > Lexus Parts & Accessories
Products 1 - 10 of 68 - 95 1995 Lexus LS400 Crank Position Sensor Denso NLA 7/13 ... 96 1996 Lexus SC300 Crank Position Sensor Denso Includes Pigtail.

Jan 27, 2016 | Lexus Cars & Trucks

1 Answer

Where can I find the crank sensor on a 2009 Nissan Titan v8 truck?


i think it's the starter. On most nissans, the starter and the crank position sensor are close to each other. Some nissans have 4 position sensors, between crank sensor, crank angle sensor, cam position sensor, and sensor sensing sensor, oh and cam angle sensor. Oh wait, maybe it's a bad ground. Nope, gotta be the staerter.
25440212-xipalmoknr3fbjmp51kycajc-3-0.jpg

25440212-xipalmoknr3fbjmp51kycajc-3-1.jpg

Feb 17, 2015 | Nissan Cars & Trucks

1 Answer

My engine stalls?


The crank sensor is located behind the crank pulley on the 3.8 liter. The crank pulley must first be removed. A 15/16" socket, three very long 8 x 1.0 bolts (pretty sure that is the size, some large washers, and a crank pulley pulley will be required.

With the crank pulley removed mark the bracket where the old crank sensor is located so that the new sensor can be placed in exactly the same position. Failure to do this will result in the new sensor and/or the crank pulley being severely damaged.

Then it's as simple as removing the old sensors and installing the new one.

Good luck and let me know if you have any questions.

Sep 21, 2014 | 2001 Buick LeSabre

1 Answer

2000 v10 ford f350 wont start with out either


If the crank sensor circuit is malfunctioning, then that is your problem. The code does not mean that you must replace your crank sensor. (sometimes it means this, sometimes it does not) The code means that either the crank sensor CIRCUIT is out of range or the crank sensor cannot SYNCRONIZE with the cam sensor. There is a whole lot more to diagnosing a crank sensor circuit than simply replacing the crank sensor. Proper diagnostic procedures need to be followed to locate the exact cause of the problem.

Nov 18, 2011 | Cars & Trucks

1 Answer

98 escort 2lt.


Does this pertain to the Crank Shaft or the Ignition sensor? I've never heard of a crank sensor... I'll check...

I found this from a guy on another website..."It does however have a crank sensor and if you look at the lower crank pulley just to the back of the pulley and go around the pulley you should find the sensor mounted on a bracket. You should see what appears as a sprocket with widely spaced teeth on the engine side of the pulley. This "sprocket" so to speak is what the crank sensor "reads". I believe that the crank sensor is the only sensor used for engine timing. "

Good Luck

Oct 26, 2008 | 1998 Ford Escort

3 Answers

Wont start


crank sensor location

Oct 15, 2008 | 2002 Kia Optima

Not finding what you are looking for?
1999 Dodge Durango Logo

634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...