Question about Oldsmobile Bravada

2 Answers

Fuel line 97 bravada fuel line is leaking under driver door how hard to fix?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 837 Answers

If you get fuel line hose you can fix it with 2 hose clamps and the rubber fuel line. Be sure that you use fuel line hose. It will be able to withstand the line pressure from the fuel pump

Posted on Feb 07, 2009

  • Jay Glendenning
    Jay Glendenning Feb 14, 2009

    Has this helped? If so I would appreciate a FixYa .. Thanks .. Crayz

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

I would recommend taking it to a shop. They are not that hard to replace. But remember you are messing with fuel and hot parts that you want to make sure the lines are properly connected

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas leak in engine compartment.


Without looking at it, If there is raw fuel anywhere up top this is what i would do:
1. check rubber fuel lines on the intake. easy fix if leaking
2. check or replace the fuel injector o-rings they are $3.00 per set easy fix.
3. check cold start injector for fuel leak also easy fix

If no fuel leaks can be found in lines i would go straight for the injector seals but in noway would i let this stop me from buying the car if thats all thats wrong. even if an injector is cracked it is under $80.00 fix. here is a link showing the injector and o-ring position http://www.oreillyauto.com/site/c/search/Fuel+Injector/02521/C0024.oap?model=Legacy&vi=1269996&year=1997&make=Subaru

Nov 06, 2012 | 1997 Subaru Legacy

2 Answers

Diagram for gas tank hoses on 1999 oldsmobile bravada


It depends on which one is leaking. You should have two fuel lines from the pump plus two or more lines for the vapor recovery. The lines for the pump are under 50-70 PSI.
I don't have a diagram.

Jun 26, 2012 | 1999 Oldsmobile Bravada

1 Answer

Gas leaks out on passenger side right under the driver side back door


fuel line leak-have to get it on a lift asap, it could be as easy as a split or dryed out rubber line or a rusted through metal fuel line-no matter what, you do not want to let this go long.

Jan 26, 2011 | 1996 Oldsmobile Bravada

1 Answer

I am going to test drive a bravada from a dealer what should I be looking for


1993 Bravada, look for any problems in the AWD system to make sure it's working. The CV joints and ball joints go bad on the Bravada's due to the AWD system. The year of the Bravada, inspect the fuel line. Fuel Line Prone to corrosion buy the drivers side rear wheel by the frame and inspect the brake lines. Other then that, everything else would be on your judgment as to corrosion under the Bravada under carriage like the rear tail gate ECT. Good luck and enjoy you new ride.

Jan 10, 2010 | 1993 Oldsmobile Bravada

1 Answer

Removal of 2000 bravada fuel filter


On frame under driver seat area. Must have high quality flare nut wrench for one side, and just press plastic release clips on other. Be Careful with gas coming out!!! When puttng new filter on, move plastic clip into fuel line fitting first before trying to press on. Bad fuel pumps are common on these vehicles, try "thepartsladi" store on eBay for low cost OEM replacement parts.

Nov 18, 2009 | 2000 Oldsmobile Bravada

3 Answers

I need to know exactly where the fuel filter for a 2000 Olds Bravada is located and how to install?


located on the inside of frame rail just undr the drivers side doors, you will need i think its 7/8 and 13/16 wrench's, unsrcew the lines from the filter {be sure to look out for fuel draining from the lines and filter} install new filter make sure the flow indicator on the filter points towards the front of the car start the car look for leaks and your done

Oct 03, 2009 | 2000 Oldsmobile Bravada

2 Answers

2000 Bravada hesitates when starting frm a stopped position.


get your hands on a fuel pressure tester.. this will tell u if u are losing fuel pressure between starts... those 4.3 v6's have a big problem with the poppet valve (injector assembly) leaking. causing the engine to flood...and losing pressure to push threw the injector... causing the hard start...but the fuel pump module will also lose pressure as has a check valve to keep that from happening but from time to time they do leak allowing fuel to flow back into the tank...with this pressure tester, have a friend turn the key to on.. after you hear the fuel pump shut off immediately pinch off the two fuel lines going from the tank to engine you can find these right below the driver side door. you will find the fuel filter there which is the pressure hose the other hoseis the return... both rubber hoses that will not be harmed by the vise grips or tools be your choice the other metal line is a vapor line which is not important. after you do pinch the lines off check the fuel pressure if it still drops with no signs of slowing down then the poppet valve is defective...if it does not move then you know it is definitely the fuel pump module (fuel pump assembly)

Aug 22, 2009 | 2000 Oldsmobile Bravada

1 Answer

96 Oldsmobile Bravada 4.3 liter


The fuel pressure regulator is located under the intake plenum attached to the six in one fuel injector.They leak quite often causing hard start conditions.The injector is also known as a spider injector which will come with the regulator .

Aug 01, 2009 | 1996 Oldsmobile Bravada

1 Answer

Leak at Driver's Side Door (dripping slowly)


Body leaks are very, very hard to pin point, mechanics usually want to go home when they ge one, but here is the way we track them down, if you feel the leak is from under the put a sprinkler hear under the car and turn it all full blast get inside and try to see where the leak is coming from, if the leak is from up top area then do the same thing, let the sprinkler rain on the car, as much water as possible, once you do find the leak get some body caulking or a can of spray under-seal and spray the leaking area, it is most likely a welded seem that is leaking. GOOD LUCK.

Sep 03, 2008 | 1991 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...