Question about 2002 Nissan Maxima

Open Question

02 nissan maxima power seat do not work

I am building a street rod and have a set of 20 maxima power seats. The passenger seat works great, but when I test the drivers seat I get nothing. I have replaced the control module with one that I have seen work, still nothing. I know I have power to the control module.

Any idea's.

Posted by on

6 Suggested Answers

pal03246
  • 705 Answers

SOURCE: REMOVING MY FRONT SEATS FROM MY 95 NISSAN MAXIMA

There are 4 bolts holding the seat to the floor. 2 in front and 2 in rear. You will need 14mm socket and ratchet or wrench. You will also have to unplug some connectors under the seat, before you take it out of the car.

Posted on Jul 17, 2008

pal03246
  • 705 Answers

SOURCE: Nissan Maxima 2003 electrical seat

You will need a new motor. Nissan has an updated motor for it. There is a TSB for the motor replacement.

Posted on Jan 11, 2009

  • 88 Answers

SOURCE: 2003 Nissan Maxima Pre-set seat position memory does not work.

remove the door panel and you will see that its disconnected or loose. plug back wire harness plug and tape it. that will solve it

Posted on Feb 16, 2009

  • 6 Answers

SOURCE: Nissan Maxima 2004 - Driver seat motor issues

It sounds like a bad motor, check the fuses hope so is not a bad motor.....Good luck!!!

Posted on Apr 08, 2009

  • 2 Answers

SOURCE: getting the back seat out of a 1991 nissan maxima

look behind the arm rest pull the 2 plastic tabs out and remove the 2 10mm bolts

Posted on Apr 16, 2009

  • 1 Answer

SOURCE: power seat buttons

Go to any U-pick IT junk yard, they should have what you're looking for.

Posted on Sep 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power seat wiring diagram


original harness was set up for seat belt indicator and such..may need to run a separate power coupling for the power seats to work..

Dec 15, 2013 | Nissan Maxima Cars & Trucks

1 Answer

I have 2010 Ford Taurus SHO seats. I believe they are 8 or 10 way memory seats. Trying to retrofit for a street rod. Have a few wiring diagrams but not enough. Can't get power to any motors yet. Numb


Problem Solved !!! I traced every wire, Bought manuals, Ended up buying a passenger seat wiring harness and removed driver memory control module plus harness. Installed new passenger harness and it works great ! You need VIN# when ordering part, Order number is slightly different then number on wire harness but when it came in numbers matched. AU5T 14D230 J4CP7

Nov 15, 2013 | 2010 Ford Taurus SHO

1 Answer

Why won't 2000 nissan maxima passenger seat go backward ?


try to look under the seat for coins that have fallen down and got stuck in the track. it happened to mine!

Apr 07, 2013 | 2002 Nissan Maxima

1 Answer

2002 nissan maxima driver seat won't work all electric is it the motor or need a new seat


Have the switch tested for the seat and also verify the seat has power to the switch before you do any parts replacing. Power seats have more than one electric motor and it very unlikely that all would stop working. Go under the seat and locate the heavy connector that comes out of the rug and connects to the seat, using a 12 volt test light probe the connector and see that at least one of the heavy wires there is "hot", you may need the key on. If you find no power check owners manual for the location of the power seat fuses, they are likely under the hood. Good luck and hope this helped. Please rate my help for Fixya, it helps to improve my standing on the site. Thanks

Jan 17, 2012 | 2002 Nissan Maxima

1 Answer

My 2004 Maxima power windows, power locks, power sunroof all stopped working at the same time. Fuses all look good. Any suggestions?


does your power seat work?if not unbolt seat lift up and unplug connectors coming up from floor to seat.wait a couple minutes for internal circuit breaker in body control module to cool and reset and see if your other components start working.if so wiring in seat has grounded out to seat frame and sometimes se it crushed under metal seat pan below cushion.usually easy to insulate and repair once you find it.

Feb 27, 2011 | 2004 Nissan Maxima

1 Answer

POWER SEAT IN MAXIMA


Have you checked the fuses that should be the first check

Jun 27, 2010 | 2000 Nissan Maxima

1 Answer

Need wiring diagram for power bucket seat


You can answer your own question by getting a wiring diagram. If you can build a street rod,you don't need any help.

May 03, 2010 | 1999 Mercury Sable

2 Answers

Power seat buttons


you can only get the whole switch if you don't mine used try www.car-parts.com hope this helps

Sep 23, 2009 | 2000 Nissan Maxima

1 Answer

2003 Nissan Maxima Pre-set seat position memory does not work.


remove the door panel and you will see that its disconnected or loose. plug back wire harness plug and tape it. that will solve it

Feb 15, 2009 | 2003 Nissan Maxima

1 Answer

REMOVING MY FRONT SEATS FROM MY 95 NISSAN MAXIMA


There are 4 bolts holding the seat to the floor. 2 in front and 2 in rear. You will need 14mm socket and ratchet or wrench. You will also have to unplug some connectors under the seat, before you take it out of the car.

Jul 17, 2008 | 1995 Nissan Maxima

Not finding what you are looking for?
2002 Nissan Maxima Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...