Question about 1997 Buick LeSabre

1 Answer

Car won't start

At anytime it may occur that you get into the car and put the key in the ignition and turn it to start the car and...............nothing happens. So after many, many times of studying this problem I found that I had to get out of the car, go over to the passenger side front door ( it's a 4 door ) put the key in and turn it to lock and then unlock and then go back around to the driver's side, get in and wait 4 minutes and then try to start the car. It would start. So, in light of this I summarized that this simply reset the security system. Now after several years of this problem I just want it to end so my question is...HOW CAN I DISARM THE SECURITY SYSTEM ON MY 1997 Buick LeSabre? HELP!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

There should be a fuse or a relay that controls the alarm system on the car and the best way i can tell you to find out is to call a buick dealer and ask them where its located so you can pull it,i dont know where the relay for it is for sure since im not there to look at the car but im sure there is a relay for it there somewhere to disable it

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Key won't turn in ignition


The list of possible causes includes the key, the lock cylinder, the steering wheel lock, and other things.
Have you tried another key ?

May 03, 2013 | 2003 Honda Odyssey

Tip

I removed the battery and now the car won't start


'I disconnected the car battery/changed the car battery and now my car won't start'

Another common question on Fixya.
You've done nothing wrong. It's simply that the immobiliser doesn't recognise the key.

Put the key into the ignition. Turn the ignition on. Press the LOCK button twice on your remote. Wait 1 minute.

Turn the ignition off and press the UNLOCK button on the remote a couple of times. This will disarm the immobiliser.

The key should be recognised and your vehicle will start.

on Feb 19, 2016 | Cars & Trucks

2 Answers

1997 taurus key won't turn in the ignition, gear selector won't go into gears


Usually a sign the tumblers in the lock cylinder have worn out or jammed.
You may have to get the lock cylinder drilled out and replaced.

Jan 13, 2013 | 1997 Ford Taurus

1 Answer

I replaced the ignition lock cylinder in my 92 cabriolet and I turned the key and it started first swing, then I was putting the steering wheel covers back on and it just turned off... When I try to turn...


If it's an automatic check fuse #15 wether it's a stick or automatic you should have power at the red & black wire coming out of your ignition switch when you turn key to start postion and power at the red wire going into switch at all times. if no power coming oit on the red/black wire you need an ignition switch. if there is power coming out of switch try putting car in nuetral (for auto trans). if still nothing you'll need to check for power at small wire going to starter when key is turned to start. if has power then need starter if no power you'll need to check starter interlock relay.

Dec 31, 2012 | Cars & Trucks

1 Answer

'98 sierra, k1500, 5.7 won't start until cold crank for 15 seconds


COuld be some problem with the starter, sometimes, when the starter warm, occurs this no start condition.

Aug 23, 2012 | 1998 GMC Jimmy

1 Answer

Stuck eldorado key in DTS ignition now car won't start


Make sure your steering wheel isn't locked. Sometimes a key won't turn until you jiggle the wheel while trying to turn the key.

Aug 21, 2012 | 2004 Cadillac DeVille DTS

1 Answer

Ignition won't turn to start car. like it is jammed or locked up.


a binding tumbler would do it try and tap on the face of the cylinder with a small hammer to loosen it up tap on it not beat on it

Aug 13, 2012 | 2004 Chevrolet Impala

1 Answer

When i put the key in the ignition it won't turn


If nothing is holding it like the steering wheel or shifter, you may need a new lock cylinder. Did you try a spare key ?

Aug 04, 2012 | 2002 Oldsmobile Alero

1 Answer

I have a 91 olds supreme 3.1 v6 it shut off and won't start back .... It starts but won't turn over.... And when turn the key back off it's blows the dis fuse wich mean direct ignition system...


Check the coils that have been replace for bent or broken prongs that plug into the ignition control module and if nothing looks damaged then i would think the ignition control module is faulty.Replace ignition control module.

Jan 21, 2012 | 1991 Oldsmobile Cutlass Supreme

1 Answer

Put key in ignition and it won't turn


Your ignition is bad, or your key might be worn out if you have more then one you might try that. Other wise you will have to replace the ignition switch.

Jul 28, 2011 | 1989 Ford Thunderbird

Not finding what you are looking for?
1997 Buick LeSabre Logo

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...