Question about 1993 Toyota Camry V6

1 Answer

1993 camry v6 A/C Flashing


The A/C button flashes on my camry 1993 v6 3.0L with 290k km. First I thought something is blocking the air flow and therefore I replaced the Air Filters. After that the AC worked for over 30 minutes and back to the flashing. Please advice.

good day

Posted by on

  • azmathshaikh Feb 14, 2009


    The sensor was ok but the wires connecting to it were somehow burnt. But indeed your solution helped. You are my hero. And thank you fixya for providing such a portal which helps people like me who hardly knows anything about cars and eventually are fooled by the local mechanics.

    Thank you again.
    Azmath Shaik



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

The AC light is flashing because the AC compressor "revolution sensor" is not working properly. You need to consider replacing the Revolution sensor that is located on the side of the compressor. You need a pro to do this, as the Freon will escape if you try this yourself.

Posted on Feb 07, 2009


1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Thermostate 1993 toyota 6 cyl engine

See here p328 if you have a 1MZ V6 (alloy block)

or here in the Engine Section p250, if you have the 3VZ engine (iron block)

Apr 08, 2013 | 1993 Toyota Camry V6

1 Answer


This can be caused by a variety of problems:
- very dirty air cleaner element- incorrect ignition timing- emissions system faulty (EGR valve blocked)- fuel injection system faulty (pressure relief valve blocked)- MAP sensor failed- throttle position sensor faulty- coolant temp sensor faulty- air temp sensor faulty

For most of these a trouble code should be available to steer you in the right direction. Is the check engine light flashing a code?

Nov 14, 2012 | 1999 Toyota Camry

1 Answer

1992 camry with 144000 miles air conditioner on button flashing between green and yellow and not putting out cold air worked great until today

try cleaning the air condenser and check if have a filter in the blower and clean it with the water or take to a air-con technician

Jul 10, 2011 | 1992 Toyota Camry V6

1 Answer

96 camry check engine light flashing?

yes is because of water,make sure everything dryes well, chance the oil also.

gl G

Apr 02, 2009 | 1993 Toyota Camry V6

1 Answer

Engine light flashing twice then 4 times or 24

These issues are unrelated. The input air temp sensor is indicated by code 24. That sensor is integrated with the airflow sensor. I don't remember which pins, but you can find info online. Che k the connector and wiring first. Tne sensor is expensive. For the overdrive issue, do you have clean fluid? You can try some additive.

Nov 06, 2017 | 1993 Toyota Camry V6

1 Answer

Is a airflow meter for v6 1993 camry needed? I am trying to put an cold air intake, but im not sure if i can remove the airflow meter or not. also any help on intalling a cold air intake on the car would...

You MUST have the air flow meter installed on your vehicle. The car will not run if you remove it. The Air Flow Meter measures the amount of air coming into the engine, and also the air temperature. This information is sent to the fuel injection computer, to determine the proper fuel to be injected. In reality, cars with "air-flow meters" do not really "benefit" from a cold air intake, due to the inherent restriction that the air flow meter causes, as it measures the air.
In short, I would not install the intake, you won't see much benefit. The graciousness of a FixYa rating for my assistance would be greatly appreciated..

Jan 14, 2009 | 1993 Toyota Camry V6

1 Answer

Fuel efficency

check for a split in the air intake tube. the v6 has a mass air flow sensor. if air is entering the engine without being counted by the mass air flow sensor it will cause a rich condition.

Sep 29, 2008 | 1992 Toyota Camry V6

1 Answer

1996 Toyota Camry a/c problems

Hi entrepreneur,
Was what came out smoke or vapour....Sounds as if you may have been using it on auto and if so just have alook at the LED on the selction it flashing out a code or is it a steady light?....It could be the expansion valve or it may be the electronic control unit....If you have a code that's showing....count the number of flashes it gives....thats the fault code number....Get that info first, so that we can go on from there....

Regards Johngee10

Aug 16, 2008 | 1993 Toyota Camry V6

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

Related Topics:

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides