SOURCE: What does code #31 for a plymouth voyager mean?
According to minimopar.knizefamily.net, fault code 31 is "Purge Canister/EGR Solenoid".
SOURCE: What does the Diagnostic error
First, remove battery negative cable.Then I would remove kick panel (by right foot when sitting) on passenger side & locate BCM (body control module) . remove the harness connector to it & spray well with contact cleaner in connector & on module where they meet. Let it dry a bit, then re-connect it & re-connect negative battery terminal, and see if that helps. It's not unusual for these codes to come up & make one think that a part needs to be replaced, when it's just a bad connection.
SOURCE: Needed serpentine belt diagram for a 91 ply. voyager 3.3L engine
Here's a link to the diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006
Good luck and please rate this solution. Thanks.
Testimonial: "Looks good."
SOURCE: how to change water pump
PLEASE DON'T FORGET TO RATE:
Water pump-3.3L and 3.8L engines
To install:
72 views
Usually answered in minutes!
×