Question about Ford Futura

1 Answer

I have no low beam

I own an ED falcon wagon and just recently i have lost my low beam lights. High beam works fine. I have been looking for the fuse for the low beam but the picture of the fuses in the repair manual is different to what is actually under the hood. Can anyone help me find the fuse for the low beams please?

Posted by on

  • 2 more comments 
  • miccameron Feb 07, 2009

    1993 ED

  • Katrina B Apr 23, 2009

    1994 Ed Falcon, Low beams arent working, but park lights and high beams work. HELP!!!

  • mlusk May 11, 2010

    what year

  • Anonymous Mar 12, 2014

    How do I adjust the low beam on a 2012 Landcruise wagon

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 373 Answers

It could be in the switch

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High beams work for both lights, 1 low beam does not


Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?

May 31, 2015 | 2006 Mazda Tribute

1 Answer

Headlights wont work on 1998 mustang v6 Running lights brake lights and gauge lights work fine. The lights only trn on when i hold the high beam switch. Any suggestions?


check fuses and check globes . Globes might have two filaments and low beam ones has blown . Had this globe thing happen on two globes at the same time on Ford Falcon's Halogon globe headlights.

May 05, 2014 | Cars & Trucks

1 Answer

1my headlights do not work ford falcon eb wagon what are the correct relays and there positions


relays are just above the battery there should be 4 in a line they have a little black cover over them ,there is start relay high beam ,then low beam there is a little metal box at one end of the relays this is the high beam biometalic strip if this is burnt out ,worn out high beam wont work as well

Feb 03, 2012 | Ford Cars & Trucks

2 Answers

My truck is actually a '95 C1500 but I understand that they were the same model from 88-98. I have 2 problems - both electrical. On a recent trip, I lost both low beam headlights at the same time. ...


There could be a fuse for each low beam light either under the hood or under the dash. If not, then prob both low beams are bad.

If you have daytime run lights, the following may be of help.

There is a daytime running light module that controls both low beams and the daytime running lights. The low beam bulbs may be OK. The high beams will work fine as they are not controlled through the module.

It may be possible to disable the daytime run lights by cutting the yellow wire going into the module and then connecting it to ground. Tape off the other end.


This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Mar 03, 2010 | 1998 Chevrolet C1500

1 Answer

Headlight headache


Soounds like you have a wire problem. Look under your dash at the headlight switch and the connector for any melting....repair as necessary. Look also around the headlight wiring....sounds like you have a wire that is shorting out.

Sep 03, 2009 | 1985 Jeep Cherokee

5 Answers

I have no headlights!! parking lights, taillights,and blinkers all work fine. none of my fuses or bulbs are blown


I have a 2004 ram 2500 and all my lights work except for low beams. It is not in the switch, I haver replaced the switch with no change. This is a circuit problem with these dodge pickups. I haven't firgured out what it is but it isn't the switch. and unless the low beams and high beams are fused seperate, it isn't a fuse problem either. i have looked for a fuse and can't even find the fuse for the headlights. Im lost like you!

Jun 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

My headlights dont work,.all other lights are fine though,.is it the fuses or the bulbs? im not sure what fuses they would be,.there seem to be different ones for the same thing


do your flash to pass lamps light when you pull the stalk towards you? If yes, the bulbs are ok.
Do the hig beams work?
Your headlamps have sepaerate fuses for each headlamp and you have a low beam relay and a high beam relay under the hood in the black box.
If everything is out, I suspect a bad headlamp switch.
Check car-part.com and look on page with * for cheapest price.

Your owner manual will identify fuses & relays.

PS, You did not recently instal high current bulbs did you? If yes, put originals back in.

HEADLAMPS

The voltage is supplied to the lamp switch through a fuse. This fuse is located in the central junction box in the left-hand footwell.
When the headlamps are switched on, a voltage is supplied to the high beam/low beam switch and to the low beam relay. The relay for the low beam is located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "low beam", then a voltage is supplied through the low beam relay to the low beam part of the headlamp assembly. The left and right-hand low beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "high beam", then a voltage is supplied through the high beam relay to the high beam part of the headlamp assembly. The left and right-hand high beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.

----------------------------------------------------------------------------------------------------------
Lamp Switch
Removal
  1. s2y~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
    Remove the lower driver's side footwell trim.
  1. Detach the lamp switch bezel.
    • Remove two screws.
  1. Remove the light switch.
    • Remove three screws.
    • Disconnect the electrical connector

Feb 23, 2009 | 2005 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...