Question about 1996 Dodge Intrepid

1 Answer

1996 dodge intepid when brakes are put on it kills motor

Go to put it in gear and it wants to go or it kills motor.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I had this problem before on my 95 Intrepid and I replaced the Idle Air Control Motor and all was well. Your Mass Airflow Sensor may also be the culprit. Your best bet would be to go to any common auto parts store, Advance, Auto Zone, the like and get a Hains manual for your specific Intrepid. It will show you how to easily and precisely check your input sensors that determine idle speed and get you running back to normal. $15-$20 here will be your BEST purchase for your car. You will thank yourself MANY times over for getting it. May well be the best purchase youll ever make for any auto you own now and in the future. Good Luck!!!

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reverse it took a few seconds to engage into gear to move when it moved I put it in drive and went forward then a small thumb occur and the motor stopped what


Does it kill the motor when you try to put it in gear now(fwd or rev)? Sounds like the torque converter clutch. Transmission part. Usually at about 150,000 miles. Hope that helps.

Feb 26, 2016 | 2006 Jeep Grand Cherokee

1 Answer

2000. Starts fine but why does it die when put in gear?


I think it is your transmission, i believe your torgue converter is locked up, what is happening, when u put it in gear the torgue from the engine is put into coverter, it has a series of cluthes inside that get tighter as force is applied by your transmission, however if the torgue converter is seized, then all of the motors energy is being applied to your trans, then to your axles, since your car is on the ground and not moving it kills the motor.

Sep 24, 2015 | Honda Accord Cars & Trucks

1 Answer

I have a 1996 ford f250. recently changed the fuel pump. it kills then its hard to start, when it does start it kills as soon as I put it into gear.


-if you believe that the pump might not work correctly. You need to check fuse pressure. If it's within its specification than there is other than the pump. It could be bad plug wire, spark plugs are too old.
bad injector.

Good luck

Mai

Apr 15, 2014 | Cars & Trucks

1 Answer

1995 chevy cavalier transmission kills the engine when put in gear


Replace the Torque Converter Switch

Your trans is working like a standard shift,
when you forget to put the clutch in at a stop

Mar 16, 2013 | 1995 Chevrolet Cavalier

1 Answer

I have a 95 caravan, its starts ok but when you put in gear it kills the motor immediately, can u help?


Hello,
Somehting that you may want to have checked is the , " nuetral safety switch ".

I hope this helps

Feb 16, 2011 | Dodge Caravan Cars & Trucks

1 Answer

1990 mustang v8 5.0automatic starts in neutral but put in park,reverse,or gear 1 kills motor


Change the neutral safety switch located on the transmission. It may just be loose. If it's loose, retighten after adjusting. Hope this helps you. Good luck!

Sep 03, 2010 | 1990 Ford Mustang

1 Answer

It dies when put in gear


have someone check it with a code reader to determine reason for the check engine light. it could be the source of your problems. the check engine light comes on so you know there is a problem. with most vehicles becoming more complex, the code reader can be used to pinpoint many problems that are not detected otherwise.

Oct 03, 2008 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
1996 Dodge Intrepid Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...