Question about 1995 Nissan Pathfinder
Fuel pump is in rear under mat
Posted on Feb 20, 2009
The fuel pump is in the fuel tank. There is an access port that resides under the back seat (drivers side). It can be use to replace and inspect the fuel gauge sensor. You can replace the fuel pump through this access port.
To access the port.."flip the rear seat cushion up and forward, then remove the inspection hole cover."
Before disconnecting the fuel lines you can remove the fuel pump relay or the fuel pump fuse and run the engine till it dies. Then crank the engine a few times to release any pressure in the lines.
You can test the physical function of the fuel pump by attaching a fuel pressure gauge to the front fuel line under the hood.Turn the key on but don't start the engine and the fuel pressure should rise to 40lbs. Start the engine and let it idle, there the fuel pressure gauge should read 35 give or take a few pounds. As you rev the engine the pressure should fluctuate between 30 and 45. If this all works as such then the fuel pump and pressure regulator are good.
You can also apply an Ohms meter across the fuel pump leads and test the electronics of the pump. Should be .2 to 5.0 Ohms
Please rate this a fixya
Posted on Feb 06, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 17, 2014 | Dodge Avenger Cars & Trucks
May 12, 2014 | 2007 Mitsubishi Outlander XLS
Jul 24, 2012 | 1982 Ford F 150
Apr 15, 2010 | 1997 Isuzu Rodeo
Mar 24, 2010 | 1997 Ford Explorer AWD
Oct 28, 2009 | 2003 Buick Century
Jun 21, 2009 | 1997 Mitsubishi Diamante
349 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: