Question about 2005 Jeep Grand Cherokee

1 Answer

Starting problem! '99 grand cherokee

Wife stopped at friends house, turned key off. A few minutes later turned key on and gages went crazy swinging back and forth. No starter no door chime, just like a dead batt but gages banging back and forth. Take key out and gages keep going. I arrive about 30 mins later and gages stopped but ticking behind dash, key still out. Put key in and gages take off again, still no starter or door chime. For some reason I step on brake pedal and everything gos back to normal. This has got me.
Thanks for any info.

Posted by on

  • ccn7 May 11, 2010

    Dido on that

  • Richard Scordino May 11, 2010

    not dead positive on this but I would check grounding and also security module.Personally, I really wish someone would get rid of 90% of this electronic junk and go back to what actually works!!! (and they wonder why no one wants to buy cars!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

The battery seems to be sending the wrong signals. get it replaced.

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 jeep grand cherokee 4.7, the alarm went crazy and the wont start. guages dont budge and horn keeps honking and lights flashing. sentry key light is on in guage cluster any help


Sounds like you need to perform a relearn on the anti theft system, it's not recognizing the key if this happens with the key inserted. Might want to look online for a reset procedure for Jeep. GM has you keeping the key in the ignition in the on position for 10 minutes.

Jul 17, 2014 | 1999 Jeep Grand Cherokee

2 Answers

I drove my car a half mile away from my house and the engine shut off and my check gages light came on my heads-up display. We talked to a few mechanics and they said there was not enough fuel pressure so...


While the key is in the last position before the start or during starting, check if you are getting fuel to the fuel line to the engine. If there is none then the fuel pump fuse or relay may have gone bad or the fuel pump itself.

Jun 18, 2011 | 2002 Pontiac Grand Prix

1 Answer

The car that broke down is a 2000 jeep grand Cherokee and what happened last night is that we were on our way across the state to my other aunts house for the night and then to my grandpa's in the morning...


What is wrong is one of the computers that tell the engine what to do is bad. I would say that it is the ECM, or the BCM. With the gauges going hay wire I would say the BCM or body control module. But if the ECM or Engine Control Module is sending the wrong signal to the BCM it could be the ECM. It is going to be one of the two.

Oct 29, 2010 | 2000 Jeep Grand Cherokee

2 Answers

My dash board of my grand cherokee laredo 2003 went crazy. guages started to move after i have had pull out the keys.. then i drove and stop and turn off the engine and shot down completelly... what can i...


I have had this problem a few times on my 2003 Grand Cherokee. After the guages go crazy then the thing will not start. First two times I replaced the battery and it fixed the problem for a short time. The real problem was corrosion on the battery cable(positive/red cable) I took some Coke and a wire brush and cleaned the cable, ends and battery terminal. This fixed the issue.

May 13, 2009 | 2003 Jeep Grand Cherokee

1 Answer

Wont start, gages go crazy


CK THE BATTERY & CABLES.SOUNDS LIKE U HAVE LOW VOLTAGE

May 07, 2009 | 1999 Jeep Grand Cherokee

3 Answers

Clicking instead of starting


have you had the battery checked or tried to jumpstart it?

Jan 23, 2009 | 2000 Jeep Grand Cherokee

1 Answer

1996 Jeep Grand Cherokee Limited Alternator issues?


have the alternator regulator and diodes tested. sometimes when the regulators fail they allow ac voltage to go to the battery. ac voltage doesn't charge the battery properly (causes it to deep cycle and shortens its life) and causes all sorts of funny problems with the car. also make sure the battery is secured properly, vibration isn't good for them at all.

Aug 11, 2008 | 1994 Jeep Grand Cherokee

1 Answer

02 Grand Am SE - Won't start


One of the easier ways to check a fuel pump is to turn the key to the on position and listen by the gas tank. You should hear the fuel pump turn on and then turn off after a couple of seconds when it reaches the proper PSI. If that seems to be working fine, there are a few different things it could be.

Jul 29, 2008 | 2002 Pontiac Grand Am

Not finding what you are looking for?
2005 Jeep Grand Cherokee Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...