Question about 2002 Ford Taurus

1 Answer

Works great on high only doesnt work on any other speed

The heater works great good heat but the fan only runs on high

Posted by on

  • Chuck Martin
    Chuck Martin May 11, 2010

    Electonic climate control or manual?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

If it is manual climate control.
You have a bad blower motor resistor. To replace it remove the lower dash panel cover below the glove box and it will mount in the heater housing with 2 screws. It will have a 4 wire connector with the wire colors being OG/BK,LG/WH, YE/RD, BK
If it is electronic climate control then you would have to replace the blower speed controller which is also located in the same place.

Posted on Feb 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3 speed fan barely changes speed


You are talking about your blower fan for the air conditioner and heater right? More information will be needed to solve the problem.

When you say it barely changes speeds, does that mean it doesnt speed up, or doesnt slow down? By that I mean, is it "stuck" on low, or high?

Most blower fans run at different speeds through the use of a multi-stage resistor built into the fan switch circuit. Low speed is a high value resistor, medium speed is a low value one, and high speed is the fan running without any resistance.

If your fan is running on high and doesnt seem to want to run on lower speeds, the resistor pack may be failing. If the fan is running on low speed only, it may be that the fan itself is beginning to fail, or that the lubricant in it has gotten gummy.

Dec 07, 2015 | Cars & Trucks

1 Answer

Heat doesnt work


cab heater. ? or engine is cold 24/7
sure, its totally dead>?
does blower fan, blow on high speed, Y/N?, (heard) and if lucky felt.
this page does most cars,

http://www.fixkick.com/AirCond/heater.html

Dec 24, 2013 | 1991 Toyota Camry

1 Answer

Heat sometimes works in 2003 envoy


First I recommend checking that your coolant level is good. Please check this cold so you don't risk getting burned. I have seen too many heater complaints where the coolant level was simply too low to fill the heater core. Next, you should check if the heater control valve is operating. I don't have any GM experience, but heater valves are often the cause of intermittent heater operation in many cars. Good luck!

Dec 20, 2011 | 2003 GMC Envoy

2 Answers

Ac fan motor doesnt work on low speeds only on


I will assume the heater fan also doesn't work on low. You will need to replace the fan speed selector switch

Jul 26, 2010 | 2006 Isuzu i-280

1 Answer

I have a 1996 Cobra SVO SVT that the high speed


ok. so you know the fan is good. switch out the relay for that fan with another same relay and check with the a/c button.

Jun 26, 2009 | 1996 Ford Mustang

1 Answer

Heater Fan does not work


Sounds like the fan control knob has shorted out. You can check the fan "blower" relay and fuse in the engine compartment but you need to make sure the control knob is good or you will keep blowing fuses and relays. If your blower fuse and relay are good, then just have the control knob checked and replaced if needed.

May 08, 2009 | 1999 Volkswagen Passat

2 Answers

Electrical


If the fan only works on "high" fan speed then you need to buy what is called a blower motor resistor. You might be able to get one from your local parts store. I don't think that is a dealer item because of the age of the car. But if it is it shouldn't be very expensive. This I'm positive will solve the issue with the front fan. Don't have enough information about the rear . Hope this is helpful.

Apr 23, 2009 | 1996 Mercury Villager

3 Answers

Heat/AC Blower fan speed only works on High


Alot of people have the same problem with the fan switch and blown bulbs. There really is no fix for this. Jeep really screwed up when designing the heater control assembly. The cheapest solution is to buy another unit off Ebay. Can always go to the dealer but be ready to PAY for there mistakes.

Jan 14, 2009 | 2005 Jeep Grand Cherokee

2 Answers

2000 OLDSMOBILE ALERO HEATER DOESNT WORK


The new vehicles with a 5 speed fan run all the speeds through the resistor and these are a very common failure. You should be able to buy one at any parts store.

Jan 13, 2009 | 2000 Oldsmobile Alero

Not finding what you are looking for?
2002 Ford Taurus Logo

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63577 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...