Can you please tell me which catalyst converter on bank 2

Error Code: P0421
Description:
Warm Up Catalytic Converter, Bank 1 - Efficiency Below Threshold
Possible Cause:
Warm Up Catalyst Bank 1 faulty.
Possible Solutions:
Check Warm Up Catalyst Bank 1 - Set Readiness.
Replace Warm Up Catalyst Bank 1.

P421=Warm up catalyst system efficiency below threshold, bank 1
P431=Warm up catalyst system efficiency below threshold, bank 2
Sounds like you may have clogged or damaged catalyst converters or bad 02 sensors.
Those codes I think are taking from after the catalyst by the sensors in the exhaust pipes. Be careful taking it to a mechanic for further checking since the catalyst converters are not cheap through them. If you need to replace the converters, shop around and get prices on aftermarket parts. Don't be ripped off by a hungry mechanic or especially a dealer.

EXHAUST RELATED ERROR CODES

There are 711 possible PO generic DTC error codes. Only 7 of the 711 codes are exhaust related.

PO401: Insufficient EGR Flow

PO402: Exhaust Gas Recirculation (EGR) Excessive Flow Detected

PO410: Secondary Air Injection System Malfunction

PO420: Catalyst System Efficiency Below Threshold (Bank 1)

PO421: Warm-Up Catalyst Efficiency Below Threshold (Bank 1)

PO430: Catalyst System Efficiency Below Threshold (Bank 2)

PO431: Warm-Up Catalyst Efficiency Below Threshold (Bank 2)

THINGS TO ASK YOURSELF OR YOUR CUSTOMER

Have there been any driveability or performance issues with the vehicle, have there been any recent repairs or tune-up work performed, if so was the check engine light reset and were the codes recorded on previous repair orders.

Do not rely on scan tool data alone. In most applications, the customer will have the check engine light reset prior to repair. If the original cause of converter failure is intermittent, only the catalyst failure code may show up (masking the original reason for converter failure).

EXHAUST RELATED ERROR CODES

There are 711 possible PO generic DTC error codes. Only 7 of the 711 codes are exhaust related.

PO401: Insufficient EGR Flow

PO402: Exhaust Gas Recirculation (EGR) Excessive Flow Detected

PO410: Secondary Air Injection System Malfunction

PO420: Catalyst System Efficiency Below Threshold (Bank 1)

PO421: Warm-Up Catalyst Efficiency Below Threshold (Bank 1)

PO430: Catalyst System Efficiency Below Threshold (Bank 2)

PO431: Warm-Up Catalyst Efficiency Below Threshold (Bank 2)

THINGS TO ASK YOURSELF OR YOUR CUSTOMER

Have there been any driveability or performance issues with the vehicle, have there been any recent repairs or tune-up work performed, if so was the check engine light reset and were the codes recorded on previous repair orders.

Do not rely on scan tool data alone. In most applications, the customer will have the check engine light reset prior to repair. If the original cause of converter failure is intermittent, only the catalyst failure code may show up

If the engine is a V6 (2.7 or 3.5 lit), bank 1 is next to the firewall (right hand) when facing the back of the engine.
If the engine is a 4 cly (I4), there is only one bank and is designated Bank 1 (exhaust manifold).

The catalyst to which the code refers is the UPSTREAM, and there is only ONE upstream cat for any bank.

Clue: Two upstream O2 sensor and two downstream O2 sensors - one before the CAT and one after the CAT. the downstream O2 sensors are identical to their upstream sisters. The only reason for the DOWNstream sensor is to monitor the CAT efficiency (threshold).

The catalyst on either bank is essentially the exhaust manifold which houses the CAT... it is the only CAT to which the code P0421 applies.

Hope that helped

P0431 Warm Up Catalyst Efficiency Below Threshold Bank 2
The word Catalyst, means that the catalytic converter needs to be replaced because some of the warm up catalyst is not working initially when the car first starts up before it warms up.

Good luck on this repair.

CODE P0421. DEFINITION-CATALYST EFFICIENCY LOW-BANK 1. EXPLANATION-THE OXYGEN SENSORS MONITOR THE CATALYTIC CONVERTERS ABILITY TO STORE OXYGEN. PROBLEM CAUSES- 1. CATALYTIC CONVERTER DEFECTIVE (FAILURE POSSIBLY DUE TO #2,3, OR 4) 2. ENGINE MISFIRE OR RUNNING CONDITION. 3. LARGE VACCUM LEAK 4. ENGINE OIL LEAKAGE INTO EXHAUST-VALVE GUIDE SEALS, PISTON RINGS. THE PCM HAS DETERMINED THAT THE WARM UP CATALYST EFFICIENCY FOR BANK 1 IS BELOW TRESHOLD FOR THE CURRENT ENGINE OPERATING CONDITION. (BANK 1 IDENTIFIES THE LOCATION OF CYLINDER #1, WHILE BANK 2 IDENTIFIES THE CYLINDERS ON THE OPPOSITE BANK).

replace O2 sensors, or your Catalytic Converter.

this is a catalytic converter fault
converter needs replaced

po421 warm up catalyst efficiency below threshhold bank 1, 431 same on bank 2..

If you have more than 60K miles start by replacing the Oxygen sensor(s) that is(are) installed after the catalytic converter(s). 
P0421: Warm up catalyst efficiency below threshold. This code means that the computer is detecting the catalyst not warming up to full function quickly enough based on information from the post cat O2 sensor. 

Good luck and hope this helps.